Crest GOG3-4812 Ultrasonic Cleaning Machine, 2011
ConditionUsed
1 available
Tank Dimensions: 48" left to right by 12" front to back by 52" deep (48" liquid depth).
Estimate Console Dimensions: 256" left to right by 32" front to back by 72" high.
Overall Dimensions with CTS-2000: 366" left to right by 49" front to back by 93" high.
Process: Wash, Rinse, Dry.
Chemistry: Station #1: Alkaline Detergent with pH 12.5
Station #2: Deionized Water
Automation: Model CTS-2000 (See Item #2)
Facilities: 2-4 GPM (18-20 GPM on demand) DIW@ 1-2 Mohm, 30-35 psi and process temperature, 225-230 CFM CDA @ 30 psi, 1-2 CFM shop air @ 60 psi, unrestricted floor drain.
Power Requirements: 480 volts/60 Hz/3 phase.
Work Flow: Left to Right
Process Temperature: 160 °F
Ultrasonic Frequency: 40 kHz
Ultrasonic Power: 6,000 watts of ultrasonic power provided by:
• 2,000 watts of ultrasonic power with twenty four (24) transducer modules direct-bonded to the bottom of the tank.
• 2,000 watts of ultrasonic power with twenty four (24) transducer modules direct-bonded to the tank right wall.
• 2,000 watts of ultrasonic power with twenty four (24) transducer modules direct-bonded to the tank left wall.
• One (1) Model 4G-6000-72-T ultrasonic generator.
Heat: 30,000 watts of heat provided by two (2) 15,000 watts of immersion heater.
Temperature control: Digital indicating temperature controller with a RTD-type temperature probe.
Plumbing: • 304 Stainless Steel Welded Plumbing, with:
• Compression fittings (up to 1" OD).
• Threaded IPS pipe fittings (3/4" IPS to 1 1/2" IPS) that are welded (for use with caustic aqueous, semi-aqueous, strong acid, or solvent solutions).
• Exceptions. The following items will have threaded fittings with Teflon tape or Teflon pipe dope:
o Pump heads (suction and discharge).
o Instrumentation devices (i.e. flow-meters, pressure gauges, etc.)
Tank Dimensions: 48" left to right by 12" front to back by 52" deep (48" liquid depth).
Estimate Console Dimensions: 256" left to right by 32" front to back by 72" high.
Overall Dimensions with CTS-2000: 366" left to right by 49" front to back by 93" high.
Process: Wash, Rinse, Dry.
Chemistry: Station #1: Alkaline Detergent with pH 12.5
Station #2: Deionized Water
Automation: Model CTS-2000 (See Item #2)
Facilities: 2-4 GPM (18-20 GPM on demand) DIW@ 1-2 Mohm, 30-35 psi and process temperature, 225-230 CFM CDA @ 30 psi, 1-2 CFM shop air @ 60 psi, unrestricted floor drain.
Power Requirements: 480 volts/60 Hz/3 phase.
Work Flow: Left to Right
Process Temperature: 160 °F
Ultrasonic Frequency: 40 kHz
Ultrasonic Power: 6,000 watts of ultrasonic power provided by:
• 2,000 watts of ultrasonic power with twenty four (24) transducer modules direct-bonded to the bottom of the tank.
• 2,000 watts of ultrasonic power with twenty four (24) transducer modules direct-bonded to the tank right wall.
• 2,000 watts of ultrasonic power with twenty four (24) transducer modules direct-bonded to the tank left wall.
• One (1) Model 4G-6000-72-T ultrasonic generator.
Heat: 30,000 watts of heat provided by two (2) 15,000 watts of immersion heater.
Temperature control: Digital indicating temperature controller with a RTD-type temperature probe.
Plumbing: • 304 Stainless Steel Welded Plumbing, with:
• Compression fittings (up to 1" OD).
• Threaded IPS pipe fittings (3/4" IPS to 1 1/2" IPS) that are welded (for use with caustic aqueous, semi-aqueous, strong acid, or solvent solutions).
• Exceptions. The following items will have threaded fittings with Teflon tape or Teflon pipe dope:
o Pump heads (suction and discharge).
o Instrumentation devices (i.e. flow-meters, pressure gauges, etc.)
We use cookies to improve your experience. Privacy Policy.