1981 LANDIS 1R

(1) Used 10" x 20" Landis Model 1R Universal ID/OD Cylindrical Grinder, s/n 883-07, New 1981

Specifications:
Nominal swing over table ............ 10"
Max. swing over table ............... 10 7/8"
Distance between centers............. 20"
Hyd. table traverse ................. 2 - 240 IPM
Traverse per turn of handwheel ...... 0.2"
Traverse per handwheel graduation ... 0.001"
Table swivel ........................ 20 deg
Wheelhead:
Swivel, left & right of center ..... 90 deg.
Max. wheel size .................... 12" x 3"5"
Max. hydraulic infeed on diam. ..... 0.09"
Rapid infeed stroke ................ 0.00005"
Min. feed graduations - on diam. ... 10.63"
Diam. reduction per wheel rev ...... 0.1"
Diam. reduction per fine feed rev .. 0.001"
Spindle motor ...................... 5 HP
Workhead:
Swivel toward/away from wheel head.. 90 deg/30 deg
Spindle speeds (6).................. 60 - 600 RPM
Spindle nose ....................... A2-5"
Spindle motor ...................... 1/4 HP
Approximate weight .................. 4200 lbs
Approximate dimensions .............. 8'L x 4'W x 6'H

Equipped with:
Universal workhead and universal wheelhead
Swing down ID grinding attachment w/18,000 RPM spindle
Hydraulic table traverse
Auto infeed @ table reversals
Auto plunge feed
Power rapid wheelhead advance & retraction
Sparkout timer
Hard film microsphere spindle bearings
6" Pratt Burnerd 3-Jaw chuck
Collet chuck
2 Follow rests and table mounted dresser
Coolant system with pump

Inspect in the L.A. area