1995 OKADA MM1524

1) Used Okada Model MM1524 5 AXIS CNC Vertical Machining Center, New 1995

**8,400 Cutting Hours**

Specifications:
Table Size....................... 83" x 59.1"
Travel - X Axis.................. 59.1"
Y Axis.................. 110"
Z Axis.................. 39.4"
B Axis (spindle tilt)... +/- 110 degrees
C Axis (spindle rotate). 0-190 degrees
Spindle Speeds................... 10,000 RPM
Spindle Nose..................... BT 40
Cutting Feed Rate (X-Y).......... 0.0394- 275 IPM
Rapid Feed Rate (X-Y)............ 394 IPM
Cutting Feed Rate (Z)............ 0.0394- 275 IPM
Rapid Feed Rate (Z).............. 315 IPM
(B Axis 90 Degrees).............. 10.83"- 50.23"
(B Axis 0 Degrees)............... 3.94"- 43.34"
Motor:........................... 7.5 HP
Distance Between Columns......... 94.56"
Max. Height Under Cross Rail..... 63.04"
Floor To Table Surface........... 29.55"
Max. Table Load.................. 4,400 Lbs.
Dimensions (L x W x H)........... 235" x 155" x 196"
Weight........................... 44,000 Lbs.

Note: This Machine Came Out Of A Research &
Development Division Of A Major Corporation
Climate Controlled Room With A Floor That You
Could Eat Off Of.
Annual Maintenance Done By Uptime Electronics

Equipped With:
Fanuc 15M CNC Control
Torit Model ECB-2 Dust Collector (5 HP)
New Spare Main Spindle
Auto Lube System
Coolant Through Spindle

Machine Was Used Exclusively For Clay, Plastic, Foam & Epoxy Parts