2000 ACER DYNAMIC 1440G

(1) Used 14"x40" Acer Model Dynamic 1440G Engine Lathe - New 2000

Center Height 6-3/4" Swing Over Bed 14" Swing Over Gap (gap type only) 21" Swing Over Cross Slide 9" Distance Between Centers 40" Spindle Nose D1-4 or A1-5 Spindle Bore Diameter 1-9/16" Type of Spindle Nose MT#5 Taper of Center
MT#3 Spindle Speeds
65-2000 RPM (8 steps) Cross Slide Travel 8-5/8" Compound Rest Travel 3-3/4" Max Size Cutting Tool
3/4" x 3/4" Spindle Diameter 1-9/16" Spindle Travel
4-1/4" Bed Length
58" Bed Width 10" Width of Gap 10" Metric Pitch Threads 0.25 - 6mm/pitch (22 kinds) Inch Pitch Threads
3-56 TPI (32 kinds) Range of Longitudinal Feeds 0.002" - 0.04"/rev. 0.05 -1.0mm/rev. Range of Cross Feeds 0.001"-0.02"/rev. 0.025 - 0.5mm/rev. Main Drive Motor 5 hp Floor Dimensions 75" x 30" Gross Weight 2550 lbs.

Equipped with:
2 Axis Sargon DRO
6" 3 jaw chuck & 11" face plate
Micrometer carriage stop
Steady rest & follow rest
4-way tool post
Built-in Coolant system
Full length splash guard
Foot Brake
Work light