DAREX M

(1) USED DAREX M-5 SERIES END MILL SHARPENER - S/N: 52049

Features:
-Sharpen an Infinite Variety of Drill Points on drills from 1/16" to 3/4" (1.5mm - 19mm)

-Create any Point Angle from 90 to 180 degrees.

-Clearance Angles from 0 to 30 degrees.

-Nine Different Point Styles, Including:
Split points
Chamfered
Helical
S Points

Specifications:
-Point angel adjustment: 90 to 180 deg
-Points grinding accuracy: meets or exceed national aerospace standard 907 lip height of .002" TIV
-Grinding wheels type: Sharpening CBN & point-split CBN
-Average Cycle Time: Typically a 1/16" drill bit can be sharpened within 30 seconds and a 3/4" drill bit will take up to 60 seconds, material removal is adjustable

Motor:
Horsepower: 1/3
R.P.M.: 3,450
Amps: 4.2
Volts: 115
Electrical: 115 Volt, Single Phase

Equipped With:
2 Grinding Wheels
Work light
Drill holding fixtures

(Comes as shown in photos, as removed from aerospace R&D shop)