2009 HYUNDAI KIA SKT 2500MTS

(1) USED HYUNDAI KIA - SKT2500MTS MILLTURN CENTER

(NEW IN 2009)

Max. Swing........................780mm (30.7")
Max. Cutting Diameter
-Turning.........................500mm (19.7")
-Milling.........................500mm (19.7")
Chuck Size........................10" Main / 8" (Sub)
Bar Capacity......................76mm (3")
Tool Change Time (Tool to Tool)...1.5 sec
Spindle Motor
-Main............................30/22 kW (40/30HP)
-Sub.............................11/7.5 kW (15/10HP)
Spindle Speed :
-Main............................3,500RPM
-Sub.............................4,500 [3,500] rpm

Equipped with:
Fanuc 18i-T Control
Additonal Manual
Air Conditioner for Elec. Cabinet
Auto Power Cut_Off
43 Tool Magazine
Auto Door
Auto Shutter (Top Door)
Gun Coolant
Barfeed Interface
Hydraulic Chuck Press - 2 Step High & Low
Hydraulic Pressure Interlock
Parts Catcher
Parts Unloader
Tool Monitoring System - 1 Channel Marposs
Work Pusher - Ejector for Sub Chuck

SPECIFICATIONS:

Max. Swing 780mm (30.7")
Max. Cutting Diameter
-Turning 500mm (19.7")
-Milling - 500mm (19.7")
Chuck Size: 10" Main / 8" (Sub)
Bar Capacity - 76mm (3")
Tool Change Time (Tool to Tool): 1.5 sec
Spindle Motor
-Main 30/22 kW (40/30HP)
-Sub 11/7.5 kW (15/10HP)
Spindle Speed :
-Main 3,500RPM
-Sub 4,500 [3,500] rpm

Equipped with:
Additonal Manual
Air Conditioner for Elec. Cabinet
Auto Power Cut_Off
43 Tool Magazine
Auto Door
Auto Shutter (Top Door)
Gun Coolant
Barfeed Interface
Hydraulic Chuck Press - 2 Step High & Low
Hydraulic Pressure Interlock
Parts Catcher
Parts Unloader
Tool Monitoring System - 1 Channel Marposs
Work Pusher - Ejector for Sub Chuck