1986 HARIG 618 AUTOSTEP

(1) USED 6"x18" HARIG 618 AUTOSTEP 3 AXIS AUTOMATIC HORIZONTAL SPINDLE SURFACE GRINDER, S/N: 6005-H, NEW 1986

SPECIFICATIONS:
WIDTH & LENGTH GROUND .................... 6" X 18"
VERTICAL WORKING HEIGHT UNDER 7" WHEEL ... 12"
LONGITUDINAL TABLE TRAVEL ................ 18-3/4"
LONGITUDINAL TABLE SPEEDS ................ 0 TO 70' FPM
AUTO CROSS FEED PER TABLE PASS ........... 0 TO 3/32"
DOWNFEED OF GRINDING WHEEL RATE .......... 0.9"/MIN.
RAPID UP/DOWN TRAVERSE ................... 2-1/2"/MIN.
AUTO DOWNFEED INCREMENT PER PASS ......... .0001" - .0099"
GRINDING WHEEL ........................... 7"x1/2"x1 1/4"
MAXIMUM GRINDING WHEEL DIAMETER .......... 8"
FLOOR AREA OPERATING SPACE ............... 71" X 45"
APPROXIMATE WEIGHT ....................... 1,500 LBS
ELECTRICAL ............................... 3/60/220V

Equipped With:
HARIG "AUTOSTEP III" AUTOMATIC INCREMENTAL DOWNFEED
CONTROL FEATURING:
-5 DIGIT THUMBWHEELS TO PRESET TOTAL DEPTH
-2 DIGIT THUMBWHEELS FOR SETTING DOWNFEED
INCREMENT FOR FEEDING @ BOTH LEFT & RIGHT, OR
LEFT ONLY OR RIGHT ONLY
-THUMBWHEEL TO PRESET 1 TO 9 AUTO SPARKOUT PASSES
-AUTOMATIC CYCLE INCLUDING RAPID RETURN STARTING
POSITION
-JOG BUTTON FOR REPOSITIONING 0.0001" PER JOG
-RAPID TRAVERSE BUTTON
-DIGITAL READOUT DISPLAY
-"AUTOSTEP III" FEEDS IN BOTH PLUNGE OR SURFACE GRINDING MODES

EQUIPPED WITH:
HYDRAULIC TABLE TRAVERSE
ELECTRO-MECHANICAL CROSS FEED (THUMBSWITCH CONTROLLED)
HARIG HAREDENED TOOL STEEL WAYS OPTION
6" X 18" "MAGNA-LOCK" FINE-DIVISION LONGITUDINAL BAR POLE
ELECTRO-MAGNETIC CHUCK
O.S. WALKER VARIABLE HOLD NEUTROFIER CONTROL
OVER-THE-WHEEL DRESSER
COOLANT SYSTEM
WORK LIGHT
1 HP 3/60/230-460 VOLT HARIG SUPER-PRECISION DIRECT
DRIVE CARTRIDGE TYPE SPINDLE
MACHINE IS PRESENTLY WIRED FOR 3/60/220 VOLTS

In excellent condition as removed from Gov't facility
Inspect in New Jersey