2004 OKUMA LT-300BB-MY

(1) USED OKUMA LT-300BB-MY TWIN SPINDLE, TWIN-TURRET TURNING
CENTER WITH SUB-SPINDLE
(MULTI-FUNCTION C & Y MILL DRILL) NEW 2004

SPECIFICATIONS:
SWING OVER BED 21.65"
MAX. DISTANCE BETWEEN SPINDLE NOSES 47.24"
MAX TURNING DIAMETER 13.78"
MAX MACHINING LENGTH 35"
SPINDLE #1
SPINDLE NOSE A2-8"
BORE DIAMETER 3.15"
BAR WORK CAPACITY 2.5"
RANGE OF SPINDLE SPEED (Main & Sub) 40-4000 RPM
C-AXIS INDEXING (Main & Sub) .001 Deg.
Y-AXIS TRAVEL (UPPER TURRET ONLY) 6.30" (-3.15"-+3.15")
CROSS-SLIDE TRAVEL
(XA-AXIS) 10.63"
(XB-AXIS) 9.06"
LONGITUDINAL TRAVEL
(ZA-AXIS) 36.61"
(ZB-AXIS) 36.22"
(W-AXIS) 37.01"
RAPID TRAVERSSE SPEED
(Z-AXIS) 1574 IPM
(X-AXIS) 1181 IPM
(W-AXIS) 1574 IPM
(Y-AXIS) 1024 IPM
TYPE AND NO OF TOOL STATIONS
TURRET NO.1 (12 Rotary) AUTO VERT. V 12
TURRET NO.2 (12 Rotary) AUTO VERT. V 12
MAIN SPINDLE DRIVE MOTOR (MAIN & SUB) 30/20 HP
ROTARY TOOL SPINDLE SPEED 100-4500 RPM
ROTARY TOOL HORSE POWER 9.5 HP
MACHINE WEIGHT 26,000 LBS.

EQUIPPED WITH:
OSP E100L COLOR CNC CONTROL
1 TOUCH IGF WITH TOOL PRESETTER
Y-HORI. BARRIER
HI-G CONTROL
NC TURRET
HEAVY TOOLING
B-TURRET SUB SPINDLE
MULTIPLE MACHINING
B-TURRET M-AXIS
SERVO LINK NCS
SERVO LINK SPINDLE
TAPE DATA IN/OUT
T-SEPARATE EDIT
BUFFER 320 METERS
PLANE CONVERSION
PROFILE GENERATION
SYNCHRO TAPPING
HELICAL CUTTING
HARMONIC SPINDLE SP.
N/C TORQUE LIMIT.
LAP 4
NOSE-R 2B
USER TASK 2
EXP. AUTO CHAMFER
PROGRAMMING HELP
HELP
E100 SPEC.
3D ANIMATION
ANIMATION
U100/U10 SPEC.
PITCH ERROR COMPENSATION
TURRET POS. COMP.
TOOL LIFE MANAGEMENT
TOOL WEAR COMPENSATION
I/M SWITCH
CYCLE TIME CALCULATION
CYCLE TIME RE. NEW
N/C WORK COUNTER
N/C WORK MONITOR
CYCLE TIME CHECK
LOAD MONITOR
MAC MAN
THERMAL COMP L2
PLC
SPINDLE ORIENTATION
M-AXIS ORIENTATION
SPINDLE MAX. IL.
PARTS CATCHER
SMW SELF CONTAINED AIR COLLET CHUCK LEFT SPINDLE (MOUNTED)
HYDRAULIC COLLET CHUCK RIGHT SPINDLE (MOUNTED)
(2) 10" 3 JAW HYDRAULIC CHUCKS (BOXED) WITH ACTUATOR AND DRAW TUBE
CHUCK GRASP CONFIRMATION
SPINDLE ORIENT ELECTRIC
N/C TURRET WITH BRAKE
M-AXIS ORIENTATION
B-TURRET M-AXIS
(2) GRUNFOSS HIGH PRESSURE 75 PSI COOLANT PUMPS
(2) GRAYMILLS 120 PSI PUMPS WITH SEPARATE COOLANT RESERVOIR
BAR FEED INTERFACE
LOAD MONITOR
MULTI TAP TRANSFORMER
Y AXIS MILLING OPTION
DUAL CHIP CONVEYORS (REAR DISCHARGE)
CYCLE TIME REDUCTION
C-X AXIS CONTOURING FUNCTION
(22) TURNING , FACING, BORING HEADS
(7) STRAIGHT MILLING HEADS
(6) RT. ANGLE MILLING HEADS
ALL STANDARD TURRET HOLDERS
ALL AVAILABLE MANUALS