Used Machine Tools
Select Filters
Filter By
1961
2021
CNC
Fabrication
Waterjet
Support Equipment & Accessories
Plastics Machinery
Tool Room & Grinding
INJECTION MOLDING, HORIZONTAL/VERTICAL (58)
MACHINING CENTERS, VERTICAL, N/C & CNC (35)
MACHINING CENTERS, HORIZONTAL, N/C & CNC (Incl Pallet Changers) (28)
TURNING CENTERS, N/C & CNC (22)
Vertical Machining Centers (5-Axis or More) (20)
WATER JET CUTTING, CNC (20)
MACHINING CENTERS, VERTICAL, N/C & CNC, (Multiple Spindle) (17)
MACHINING CENTERS, HORIZONTAL, N/C & CNC (13)
ROBOTS, (Including N/C & CNC) (13)
LATHES, COMBINATION, N/C & CNC (13)
LASERS (12)
TURNING CENTERS, N/C & CNC. (12)
PUNCHES, TURRET, N/C & CNC (12)
BLOW MOLDING MACHINES (9)
COORDINATE MEASURING MACHINES, (Including N/C & CNC) (7)
EXTRUDERS (7)
MACHINING CENTERS, GANTRY TYPE, N/C & CNC (7)
TRANSFORMERS, 3 PHASE, (60 Cycle) (5)
LATHES, COMBINATION, N/C & CNC, (3-axis Or More) (5)
MACHINING CENTERS, VERT., CNC, BRIDGE TYPE (5)
GRINDERS, CYLINDRICAL, UNIVERSAL (5)
ELECTRIC DISCHARGE MACHINES, WIRE, N/C & CNC (5)
GRINDERS, SURFACE, RECIPROCATING TABLE, (Horizontal Spindle) (5)
BRAKES, PRESS, HYDRAULIC (Inch/Ton) (4)
AUTOMATIC SCREW MACHINES, SWISS TYPE, N/C & CNC (4)
3D PRINTERS (4)
BORING MILLS, VERTICAL, CNC, (W/Milling Spindle & ATC) (4)
GRANULATORS (4)
WELDING POSITIONERS (3)
LATHES, ENGINE (3)
LATHES, FLAT BED, N/C & CNC (3)
PLASTICS AUXILIARY EQUIPMENT (3)
MILLERS, VERTICAL (3)
SHEARS, POWER SQUARING (Inches) (3)
GEAR GENERATORS, HERRINGBONE (3)
Environmental Chambers (2)
BRAKES, PRESS, N/C & CNC, (Including Hyd/Mech) (2)
LATHES, SPINNING (2)
PLASTICS DRYER (2)
ELECTRIC DISCHARGE MACHINES, CONVENTIONAL, (Ram Type, Sinker) (2)
Chip Processing Systems (2)
GRINDERS, SURFACE, N/C & CNC (2)
PRINTING/COPYING EQUIPMENT (2)
BORING MILLS, HORIZONTAL, FLOOR TYPE, N/C & CNC (2)
ELECTRIC DISCHARGE MACHINES, (Small Hole) (2)
VACUUM PUMPS (2)
GRINDERS, CENTERLESS (2)
Variable Frequency Drive (2)
JIG BORERS, N/C & CNC (2)
GUN DRILLS (2)
WELDERS, SPOT, N/C & CNC, ROBOTIC (2)
TABLES, ROTARY (2)
AUTOMATIC SCREW MACHINES, MULTIPLE SPINDLE (2)
DRILLS, RADIAL (2)
Universal Machining Centers (2)
CHILLERS (2)
HOPPER (2)
SCREW MACHINES, AUTOMATIC (2)
SAWS, BAND, HORIZONTAL (2)
SHOT BLAST/PEENING, AIRLESS (2)
BELT SANDERS (2)
AIR COMPRESSORS, ROTARY SCREW/SLIDING VANE (2)
GRINDERS, CYLINDRICAL, PLAIN (2)
CLEANERS (1)
Grooving Machines (1)
PUNCH-SHEARS, IRONWORKERS (1)
SHEARS, HYDRAULIC, (Guillotine) (1)
Laser Markers (1)
HONES, VERTICAL (1)
MIXERS, LIQUID (1)
GEAR TESTERS (1)
BENDERS, PIPE, TUBE & BAR, N/C & CNC (1)
Extruders (1)
CRANES, BRIDGE & OVERHEAD (1)
GRINDERS, SURFACE, ROTARY TYPE, (Horizontal Spindle) (1)
LATHES, GAP, REMOVABLE GAP (1)
Plasma Cutters (1)
Motor, Electric (1)
PUMPS, MISCELLANEOUS (1)
Control (1)
Control Panel (1)
Power Unit (1)
WELDERS, SPOT (1)
SLITTER (1)
PRESSES, STRAIGHT SIDE, CRANKLESS (1)
PRESSES, DIE TRYOUT & SPOTTING (1)
HONES, HORIZONTAL (1)
ROTARY TABLES (1)
BAR FEEDS, MECH., (Hydrostatic & Hydrodynamic) (1)
LIFT TRUCKS (1)
TABLES, N/C & CNC (1)
CRANES, JIB (1)
FORK LIFT TRUCKS (1)
BENDERS, PANEL, N/C & CNC (1)
ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal) (1)
KEYSEATERS (1)
BORING MILLS, HORIZONTAL, TABLE TYPE, N/C & CNC (1)
PUNCHES, SINGLE STATION, N/C & CNC (1)
GEAR HOBBERS, HORIZONTAL, N/C & CNC (1)
GRINDERS, CYLINDRICAL, N/C & CNC (1)
GRINDERS, CENTERLESS, N/C & CNC (1)
PLASTIC ACCESSORIES (1)
LATHES, ENGINE (Shaft), N/C & CNC (1)
AIR COMPRESSORS, DRYERS, (Refrigerated) (1)
ELECTRIC DISCHARGE MACHINES, (Small Hole), N/C & CNC (1)
PRESSES, C-FRAME (1)
SAWS, MITRE (1)
ROUTERS (1)
BEAM/DRILL LINES, N/C & CNC (1)
WASHING EQUIPMENT (1)
PALLET CHANGER, MANUAL, Also N/C & CNC (1)
FLAME & PLASMA CUTTING EQUIPMENT, N/C & CNC (1)
FACING & CENTERING MACHINES (1)
ROUTERS, N/C & CNC (1)
METALLIZING ARC/SPRAY SYSTEMS (1)
PUNCHES, TURRET, N/C & CNC (Fms Systems) (1)
GRINDERS, CYLINDRICAL, UNIVERSAL, N/C & CNC (1)
AUTOMATIC CHUCKERS, MULTIPLE SPINDLE, N/C & CNC (1)
BORING MILLS, VERTICAL, N/C & CNC (1)
GRINDERS, CYLINDRICAL, PLAIN (Angle Head), N/C & CNC (1)
AUTOCLAVES (1)
PRESSES, STRAIGHTENING (1)
GRINDERS, DRILL (1)
FURNACES (1)
OVENS, BATCH (1)
SHEARS, FOOT POWER (1)
BORING MILLS, VERTICAL - (Including Vertical Turret Lathes) (1)
SAWS, PLATE, VERTICAL BAND (1)
ELECTRIC DISCHARGE MACHINES, CONVENTIONAL, N/C & CNC (1)
PUNCHES, FABRICATING, N/C & CNC (1)
BENDING ROLLS (1)
FOLDING MACHINES (1)
MACHINING CENTERS, HORIZ/VERT, N/C & CNC (1)
WATERJET (1)
LATHES, BAR, N/C & CNC (1)
SANDERS (1)
GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), N/C & CNC (1)
PLASTIC & RUBBER EQUIPMENT (1)
SNK
NPL
HAAS
FREEDOM
FLOW
RAMCO
PEDDINGHAUS
PINACHO
HYUNDAI WIA
MAKINO
DOOSAN
HERMLE
DMG
TOYODA
HWACHEON
DMG MORI
NAKAMURA TOME
3D PLATFORM
OKUMA
+GF+ MIKRON
OMAX
MAZAK
TSUDAKOMA
EMAG
SAMSUNG
KOMO
QUINCY
YAOAN ANFU PLASTIC MACHINERY
AEC
IGM
OCEAN
ENGEL
COMAU
TORNOS
ABB
HURCO
FPT
YASDA
MITUTOYO
MORI SEIKI
FASTEMS
HYUNDAI
GANESH
JOMAR
MIGHTY VIPER
HORNET
CASTOLIN EUTECTIC
LAGUNA
KRAUSS MAFFEI
ABSOLUTE
MATEC
MITEK
MITSUI
LK MACHINERY
ARBURG
ENSHU
STAR
COPE
MATSUURA
YSP
TEMPTEK
KAO MING
DTI
SUPERTEC
PRIMA
MONTEQUIPO
YAMA SEIKI
CURRENT EDM
LEITZ
WENZEL
KINGSTON
NISSEI
AWEA
STRAMA MPS
NIIGATA
YASKAWA
BOURN & KOCH
BYSTRONIC
BLM
CINCINNATI
EUROMAC
Z CORPORATION
LOGIC SEAL
RAPID
GILDEMEISTER
MITSUBISHI
KITAMURA
MOLLART
HARTFORD TAIWAN
LEISTRITZ
DECKEL MAHO
KDM
BOEHRINGER
LK
FADAL
ADVANCE
AKIRA SEIKI
GIDDINGS & LEWIS
TEST EQUITY
JET EDGE
KOYO
ZEKS
KELCO
CHARMILLES
FIDIA
KRRAS
PROMAC
PRESTON EATON
TECHNI
BELMONT
TRUMPF
INGERSOLL
JSW
MITSUI SEIKI
SODICK
SUMITOMO
OKK
AGIE
TOSHIBA
CLAUSING
HARDINGE
JOBS
YUSHIN
VAN DORN
ZEISS
HUSKY
CHEVALIER
DEMAG
DRI-AIR
AMADA
STUDER
HANWHA
RANGER
FASTI
WFL
BIRLIK
PANDJIRIS
DAINICHI
WEBB CORPORATION
NICOLAS CORREA
JOHNFORD
NISSHINBO
AUTOJECTOR
DAVIS & STANDARD
PARAGON
TOYO
TIMESAVER
HENRI LINE
STERLING
HMTW
TOS
HPM
TANNEWITZ
SANTEC
FARREL
United McGill
OKAMOTO
DECKEL
TACCHELLA
PIETRO CARNAGHI
WELLS
SCHUTTE
MYFORD
EITEL
IMPROVED
GIDDINGS & LEWIS BICKFORD
CARLTON
DIACRO
BLUE M
SECO
SYKES
AMERICAN MSI
TAYLOR WINFIELD
DOALL
DALIAN
RANSOHOFF
KITAGAWA
UNKNOWN
NOVATEC
OSTLING
AUTOSPIN
MJC
ATLANTIC
MAGUIRE
UNA-DYN
DEA
PINES
RIZE
CIDAN
FELL-FAB
ELTEE
SUPERMAX
SUNNEN
KITAMURA MYCENTER
HAEUSLER
SIP
HYUNDAI KIA
HITACHI SEIKI
SHARNOA
BRITISH CLEARING
CLEARING
LNS
MITSUBISHI FORKLIFT
CLARK
GORBELL
JEFFERSON ELECTRIC
GENERAL SIGNAL
JOHNSON
YUASA
DELTA
HAYSSEN
STANDARD MODERN
ACRA-TURN
PRAB
OOYA
CUMBERLAND
NRM
KOIKE
T&R
FURNAS
PRATT & WHITNEY
BLANCHARD
OMi & General Hoist
TOSHIBA MOTORS
Pump Test Equipment
ROTO-JET
Power Unit
Control Panel
Centrilift
EATON
KALAMAZOO INDUSTRIES
Reset Filters

Used Machine Tools

snk-rb-8mv SNK RB-8VM Stock #:39858 Year:2021 Description:393.7" x 157.5" table, 50hp, 4500rpm, coolant through spindle, ATC 80, two-conveyor type chip conveyor, metal-type slash cover, high pressure cutting oil tank, low cutting oil level alarm. Brand new in crate. photo-2020-10-21-13-49-03 NPL AG-1030ii Stock #:39525 Year:2020    40186-1 HAAS ST-40 Stock #:40186 Year:2020    6a8ec560-b6c4-48a0-83d3-3517d80fc63a FREEDOM FMC-4020 STD Stock #:40329 Year:2020 Description:500 psi coolant through spindle, Renishaw probe and tool presetter, [2] chip carts - Extremely Low Hours 2020-flow-mach-500-3080x-cnc-waterjet-ref-8070347-2 FLOW MACH 500 3080X Stock #:40449 Year:2020    38000-100824 RAMCO MK32CSSX Stock #:38000 Year:2019 Description:27" x 31" x 22" cap peddinhause-peddi-xdm-630-2019 PEDDINGHAUS PEDDI XDM-630 Stock #:38871 Year:2019    img-2413 FLOW MACH 100 3020 Stock #:39083 Year:2019    39786-1 PINACHO STH-400/3000 Stock #:39786 Year:2019 Description:Fagor 8055i FL/TC Series CNC control, 8 position turret, full enclosure with coolant system and chip conveyor, all available static tool holders 39943-1 HYUNDAI WIA KH63G Stock #:39943 Year:2019 Description:Fanuc 31i-B CNC control, 2 pallet changer system, full B-Axis rotary table, 90 ATC, high-pressure through-spindle coolant, chip conveyor, dual chip augers, oil chiller makino-t1-stock MAKINO T1 Stock #:40340 Year:2019 Description:(6) Makino T1 5-Axis HMC's with 39 position APC 40499-2 DOOSAN VM 960L Stock #:40499 Year:2019 Description:94"X x 37"Y x 31"Z travels, 102" x 37" table, 9921 lb table load, 12k rpm, BT #50 taper, 30 tool ATC, chip conveyor, Fanuc 31iB control 40557-6 HERMLE C 650 Stock #:40557 Year:2019 Description:41"X 35"Y 23"Z travels, Heidenhain TNC 640 control, 56hp, 18k rpm, HSK-A63 taper, ATC 42, rotary table, 80 bar internal coolant supply, scraper belt conveyor with ICS, external air blast, air blast through spindle center, Renishaw probe Blum tool break, swarf flushing nozzle, mist extraction system nrx2000-1-front-dsc00733-168316 DMG NRX 2000 Stock #:38623 Year:2018 Description:Parallel Dual Spindle CNC Turning Center suited for High Production 9 TOYODA FH500J Stock #:39519 Year:2018 Description:15,000 rpm, Cat 40, Full NC table (360,000 positions), 500mm Pallet, 29.74" x 28.74" x 33.46", rapids 2,362 ipm front HWACHEON VESTA-1000 Stock #:40019 Year:2018 Description:12,000 rpm, Fanuc 0i-MF, 39.37"X 21.65"Y 19.69"Z, High Pressure Through Spindle Coolant, Chip Conveyor Made in Korea, ***Low Hours*** 40122-1 DMG MORI NL2500Y Stock #:40122 Year:2018 Description:Celos M760UM CNC control, 36.2" swing, 49" machining, 7.6" turning, 10" L/8" R Kitagawa chuck, 4" bar cap, 25hp, 4000rpm, 14.4" turning diameter, 12 tool turret, high-pressure coolant, dual spindle, live tooling, Y-axis, Barfeeder interphase img-0801 HAAS VF-3YT/50 Stock #:40202 Year:2018 Description:40"X 26"Y 25"Z travels, 30hp 7500 rpm, CT50, ATC 30, Haas 4-axis HSA6 rotary table, 300 PSI coolant thru spindle, wireless intuitive probing, high speed machining option, skimmer 40283-1 NAKAMURA TOME NTY3-100 Stock #:40283 Year:2018 Description:Twin spindle, 3-turret, live tools from Heimatec and Koma, Patriot 551 12', LNS Fox mist collector, 12 tool stations img-3796 3D PLATFORM 300 Stock #:40308 Year:2018 Description:3D PLATFORM SERIES 300 DIGITAL PRINTER EXCELLENT CONDITION img-3798 3D PLATFORM 300 Stock #:40316 Year:2018 Description:3DP Series laser printer, Duet Ethernet + Brainbox touch screen, liquid cooling system, high temp extruder, Sureprint Pro servo motors, 27.5" Z height, 1000-ASY-0032 installation tool 40442-3 OKUMA MB-5000H Stock #:40442 Year:2018 Description:OSP-P300MA control, 30” x 30” x 30” Travels, Cat 40, ATC, 15k RPM, Fastems LSD-MD 20 Position Pallet Shuttle, (30) 20" Pallets 40475-1 OKUMA MB-5000H Stock #:40475 Year:2018 Description:Okuma MB-5000H 4-Axis HMC, OSP-P300MA Control, 30” x 30” x 30” Travels, Cat 40, 146 ATC, 15k RPM, 20" Pallet, s/n 217568, New 2018 Less than 3000 cutting hours, machine was doing Boeing 737 Max work and is in mint condition. img-5718 +GF+ MIKRON MILL P800 UD Stock #:39262 Year:2017 Description:5-axis simultaneous, 60 ATC, HSK 63, 20K RPM StepTec spindle, Siemens control, Blum laser, side discharge conveyor maxiem OMAX MAXIEM 2040 Stock #:39290 Year:2017    20210111-144820 MAZAK VERSATECH V-100N/200 Stock #:39443 Year:2017    39544 TSUDAKOMA RNCV-1501L Stock #:39544 Year:2017 Description:59" table diameter, Unused 39637-3 EMAG VL 3 DUO Stock #:39637 Year:2017 Description:Turret drive unit for driven tools, turret disc for driven tools, turret basic unit and console, Fanuc 31i/21iB CNC Control, 5000 rpm, 2 L-shuttle, track motion, component storage and transport conveyor, swarf conveyor scraper type - rear discharge, coolant supply, coolant twin-filter, manually operated, 2 component gauging 39855-1 SAMSUNG SL 1500 Stock #:39855 Year:2017 Description:Fanuc 0i-TF CNC Control, 25hp, 6k rpm, ATC 12, 2" bar capacity, Samsung USA Package, Royal Products 16C Collet chuck, programmable tailstock, tool presetter, chip conveyor, air blow 40064-1 KOMO FUSION 5 AXIS 512 Stock #:40064 Year:2017 Description:Komo Production Manager software, Fanuc 310i-B5 control, Renishaw TS27R Toolsetter, RMP 600 part probe, safety light beam/safety fence w/gate, surge suppressor, ATC 60, 60" x 144" table, 20hp, 22k rpm, 159"X 95"Y 48"Z travels 35 OMAX MAXIEM 2040 Stock #:40113 Year:2017    s-l500-9 DOOSAN HC 400 II Stock #:40193 Year:2017 Description:12,000RPM, Cat-40, 5-Pallet Changer, Chip Conveyor, ***Only 663 Cutting hours*** makino-t1-stock MAKINO T1 Stock #:40339 Year:2017 Description:(5) Makino T1 5-Axis HMC's with 26 position APC makino-t1-stock MAKINO T1 Stock #:40391 Year:2017 Description:Makino T1 5-Axis HMC's, Pro 5, 12K RPM, 137 ATC, CTS img-8070 QUINCY QSI-300i Stock #:40510 Year:2017    img-3698 YAOAN ANFU PLASTIC MACHINERY AF02 Stock #:40535 Year:2017 Description:80 MM YAOAN ANFU PLASTIC MACHINERY EXTRUSION LINE MFG IN 2017 38612 AEC GP1018 Stock #:38612 Year:2016 Description:10 HP AEC MODEL GP1018 GRANULATOR MFG 2016 NEEDS REPAIR image0 AEC GP1018 Stock #:38615 Year:2016 Description:10 HP AEC GRANULATOR MFG NEW IN 2016 igm IGM RTE 476 Stock #:38660 Year:2016 Description:Robotic 8-axis system for serial GMAW / FCAW welding application of large components (Reach: 4000 mm long x 3000 mm wide x 1500 mm high), Rotary Welding Positioner 20200826-095552 OCEAN Terminator 18-25 Stock #:39090 Year:2016    engel-vc-330h-200l-160-dual-material-yr-2016 ENGEL VC330H-200L-160 2-COLOR Stock #:39412 Year:2016 Description:160 TON 2.6 OZ AND 2.2 OZ ENGEL MODEL 2-COLOR VC330H/200L-160 INJECTION MOLDING MACHINE MFG 2016 3 COMAU SMART-5 Press 130-3.7 Stock #:39616 Year:2016 Description:Excellent condition and 1466 hours. Complete with robot, controller, cables to controller, teach pendant, teach pendant controller quote46018-img-0173 HAAS UMC-750SS Stock #:39646 Year:2016 Description:15,000 rpm, High Speed Machining, Next Gen Control, Wireless Intuitive Probing System, Chip Conveyor Rigid Tapping, Through Tool Air Blast, Dynamic Work Offset and Tool Center Point Control, Second Home Position img-9822 TORNOS MULTISWISS 6X14 Stock #:39869 Year:2016 Description:6 Spindles, 14mm Diameter (with Attachment to Expand to 16mm), 14-Axis, 8,000 RPM, Cutting time: 11,326 hrs photo-may-13-22-43-08-1 MAZAK VORTEX E-1060V/8S Stock #:40049 Year:2016 Description:Mazatrol Matrix 2 CNC control, 50hp, 10k rpm, 39.4" sq. bore tap pallet, 120 ATC, air blast for NC4, high pressure coolant through spindle w/ chiller, chip conveyor w/ side disposal, 2000 cutting hours 40056e ABB IRB 6400 M 97 Stock #:40056 Year:2016    img-8235 HAAS UMC-750SS Stock #:40342 Year:2016 Description:30" x 20" x 20" travels, with 24.8"x 19.7 integrated 2-axis trunnion rotary table, 40 taper, 30hp, 15k rpm, inline direct-drive, 40+1 side mount tool changer, Wireless Intuitive Probing System, rigid tapping, and 75-gallon flood coolant system. 161198 DMG MORI ECOTURN 450 Stock #:40384 Year:2016 Description:26.77" swing over bed, 26.97" distance between centers, 15.98" max turning diameter, 23.6" max turning length, 3" bore, 4,000 RPM, 24 HP, 12-station turret, chip conveyor, tailstock 40536-2 HURCO VMX50-50T Stock #:40536 Year:2016 Description:50"X 26"Y 24"Z travels, 30hp, 8k rpm, 30 ATC, CAT 50, Hurco Winmax CNC control, conversational NC [G-Code] or NC/conversational merge, chip conveyor m9500-1 DOOSAN MYNX 9500/50 Stock #:40562 Year:2016 Description:98.4"X 37.4"Y 33.5"Z travels, 6.000 RPM, CAT-50 Big Plus, through spindle coolant, chip conveyor, Fanuc CNC control, low hours 2020226-3-200226-0067 MAZAK VORTEX E-1060V/8S Stock #:38835 Year:2015    quincy-compressor QUINCY QGV-20 Stock #:38849 Year:2015 Description:Variable Speed fpt-3 FPT STINGER 180 Stock #:39212 Year:2015 Description:Heidenhain iTNC530, 69"x55"31", HSK63, 60 ATC, 22k RPM, img-5827 DMG MORI CTX GAMMA 1250 TC LINEAR Stock #:39263 Year:2015    17cff18f-38cf-498f-9a00-6990ef6a0e72 YASDA YMC-430 Stock #:39539 Year:2015 Description:Yasda YMC 430 + RT 10 5-Axis High Precision CNC Vertical Machining Center, ~50 HSK holders 39557-2 YASDA YBM-950V Stock #:39860 Year:2015 Description:Fanuc 31i-B5 15" color LCD, HSK-A63, ATC30, 24k rpm spindle speed, 900X 500Y 350Z travels [mm] 39921-1 MAZAK SLANT TURN NEXUS 500 Stock #:39921 Year:2015 Description:Matrix Nexus 2 CNC control Mazatrol, 18″ Schunk 500-230 Air Chuck, EIA Helical Tap Cycle, EIA Pattern Cycle, Tilted Working Plane, Pitch Error Comp, Chip Conveyor 40015-8 MAZAK OPTIPLEX 3015 CO2 Stock #:40015 Year:2015 Description:2500 watt, maximum sheet size 5' x 10', 2050 lbs max workpiece weight, Mazak controls, shuttle table, chiller, dust collector, new 2015, 13,405 hours 40039-6 MAKINO A-51NX Stock #:40039 Year:2015 Description:Fanuc Professional 5 CNC control, CAT40, 60ATC, 25hp, 14k rpm, pallet , CTS 300psi coolant through spindle, DD motor rotary table, ChipBlaster 22gpm secondary filtration to 10 microns 40060-1 HYUNDAI WIA L400C Stock #:40060 Year:2015 Description:Fanuc Series 32i Model A CNC control, 35hp, 2k rpm, max turning diameter 24.8", max turning length 46", 12.8"X 47.44"Y travels, 4.6" bar capacity, 5.1" spindle bore, tailstock, 10 position turret, chip conveyor, 6 bar high-pressure coolant system 40271a MITUTOYO CRYSTA APEX S 7106 Stock #:40271 Year:2015 Description:27.3" x 39.4" x 23.4", MCosmos v4.1, PH-10MQ probe 4250-1 MORI SEIKI NT 4250DGC/1500S Stock #:40389 Year:2015 Description:Brand new, unused, under power, Fanuc 31i A5 CNC control, 12" Kitagawa Chuck, ATC 40, Renishaw Measuring OMP60, Super High-pressure Coolant System, Coolant Cooling System, Mist Collector, Chip Conveyor 40402-1 FASTEMS LSD-MD Stock #:40402 Year:2015 Description:Fastems LSD-MD 30 Position Pallet Shuttle, AGV, (2) Pallet Load / Unload Stations, Control & Enclosure, s/n X59718 V4.4, New 2015 40405 ENGEL SILICONE VICTORY 200/100 LIM Stock #:40405 Year:2015 Description:100 TON 3.3 OZ ENGEL MODEL VICTORY 200/100 LIM SILICONE INJECTION MOLDING MACHINE MFG 2015 hyundai-hs6300-frt-side-091521 HYUNDAI HS 6300 Stock #:40417 Year:2015 Description:Fanuc 31i CNC Control, 50 taper, 30hp, 8k rpm, 1000psi through-spindle coolant, 41.3"X 34.4"Y 25.2"Z travels, 90 ATC, chip conveyor 40419-13 GANESH CYCLONE 32CS Stock #:40419 Year:2015 Description:7-axis, 32mm, 1.25" bar capacity, 6k rpm, chip conveyor, 6' Edge Technologies Rebel B65 servo barfeed img-2126 HAAS SUPER MINI MILL Stock #:40547 Year:2015 Description:16"X 12"Y 10"Z travels, 10k rpm, 15hp, 40 taper, high flow coolant pump kit, 40 gallon coolant tank, early power failure detection module, ethernet, rigid tapping, 10 station ATC, touchscreen, air blast, work light, 4" extended Z-axis clearance, programmable coolant nozzle 38100-100850 JOMAR 3000-115 Stock #:38100 Year:2014 Description:111 TON JOMAR INJECTION BLOW MOLDER 38128-101127 MIGHTY VIPER VMC-137 Stock #:38128 Year:2014 Description:Fanuc 0iMD, 51" x 27" x 27", CTS, CT50, 24 ATC, 6K RPM Geared Head 38629-104708 HORNET RETRO SYSTEMS Stock #:38629 Year:2014 Description:5' X 10', HYPERTHERM XPR 130 XD HI-DEF PLASMA, 180 HOURS CUT TIME img-20200519-142837 DMG MORI NZX 2500 Stock #:38687 Year:2014 Description:Mori Control, 23" length, 10" Kitagawa chuck, LNS Turbo MH-250 6-arc-spray-castoline-for-sale CASTOLIN EUTECTIC EAS4 Stock #:38887 Year:2014 Description:350 amps, 20m max spray distance, 38941 LAGUNA Puma Stock #:38941 Year:2014    38952 KRAUSS MAFFEI KM280-750AX ELECTRIC Stock #:38952 Year:2014 Description:USED 308 TON 8.08 OZ KRAUSS MAFFEI MODEL KM280/750AX ELECTRIC PLASTIC INJECTION MOLDING MACHINE MFG 2014 press-52-1 KRAUSS MAFFEI AX230-750 Stock #:38958 Year:2014 Description:USED 253 TON 15.2 OZ KRAUSS MAFFEI MODEL KM230/180AX ELECTRIC INJECTION MOLDING MACHINE MFG 2014 39010 KRAUSS MAFFEI AX280-750 Stock #:39010 Year:2014 Description:USED 308 TON 15.2 OZ KRAUSS MAFFEI MODEL AX280-750 ELECTRIC PLASTIC INJECTION MOLDING MACHINE MFG 2014 Absolute model MAX BW15-1700P ROBOT MFG 2014 ABSOLUTE MAXBW15-1700P Stock #:39054 Year:2014 Description:Absolute model MAX BW15-1700P ROBOT MFG 2014 bef07eaa68a113f34457bc81a61dbf0b-5b9d31ee8cdcfd4d0f8713145ed5e1c6 DOOSAN MYNX 5400 Stock #:39196 Year:2014 Description:Fanuc, Box Ways, Table: 47.2" x 21.3 (X/Y/Z): 40.2"/21.3"/20.9" img-5736 +GF+ MIKRON HPM 800U HD Stock #:39341 Year:2014 Description:5-axis simultaneous, 60 ATC, HSK 63, 20K RPM StepTec spindle, Heidenhain Control, Blum Laser, Side Discharge conv, two pallet APC Matec 30 HVK-FDZ20 5-Axis VMC with Turning Capacity 2014 MATEC 30 HVK Stock #:39534 Year:2014 Description:Siemens 840D, 51"X 25"Y 32"Z, 25" rotary tables, 48 ATC, HSK-63, new 2014 Mitek 30 HVK-FDZ20 5-Axis VMC MITEK 30 HVK-FDZ20 Stock #:39546 Year:2014 Description:5-Axis VMC with turning capacity, Seimens 840D, 51"x 25"x 32", 25" rotary tables, 48ATC, HSK-63, New 2014 250hmd MITSUI MSG-250HMD Stock #:39620 Year:2014 Description:8" x 18" fully auto, DRO, EM chuck fine/rough feeds 39647-1 LK MACHINERY CMC-3555 Stock #:39647 Year:2014 Description:***Demo Model*** Fanuc 31i-5 control, 12,000 rpm, BT-30, Spindle oil cooler, work light, flood coolant system, chip disposal system, link type chip conveyor, spindle chiller, automatic air blast through spindle, automatic central lubrication system 39712 ARBURG VERTICAL/VERTICAL 1200T-1600-400 Stock #:39712 Year:2014 Description:176 TON 6.4 OZ ARBURG MODEL 1200T-1600-400 VERTICAL CLAMP AND INJECTION MACHINE MFG 2014 img-3287 ENSHU GE590H Stock #:39760 Year:2014 Description:Fanuc Control, 10,000rpm, BIGPLUS CAT-50, 39.4"X x 35.4"Y x 41.3"Z, 130 tool holder, probe, HP CTS, 24.8" pallets, can accept 31.5" pallets interchangeably. 6000 CUT HOURS 39880-1 DOOSAN PUMA 400C Stock #:39880 Year:2014 Description:Fanuc Series 32i Model A, 21" Hydraulic Chuck Tool Presetter Chip Conveyor, 30.3" swing, 12 turret capacity, 50hp, 1500rpm, bar capacity 6.55" image000000 STAR SA-1000S-2 Stock #:40313 Year:2014 Description:STAR DUAL ARM SERVO ROBOT MODEL SA-1000S-2 MFG 2014 40362-2 HAAS VF-6/50 Stock #:40362 Year:2014 Description:64"X 32"Y 30"Z travels, 50 taper, 7500 rpm, 30 ATC, pre-wired for 4th axis, through-spindle coolant, 95 gallon coolant tank, chip removal system mach4c5 FLOW MACH 4 2020C Stock #:40380 Year:2014    40386 MITUTOYO CRYSTA APEX S 7106 Stock #:40386 Year:2014 Description:MCosmos 3 V4, PH-10MQ/SP25 40456-1 COMAU RACER 7-1.4 Stock #:40456 Year:2014    (4) Makino MAG3.EX 5-Axis High Speed HMC Machine Cell with 24 Pallets MAKINO MAG3.EX Stock #:40494 Year:2014 Description:Makino Professional 5 5-Axis Control, 24 APC, 157.5” x 59.1” x 39.4” Travels, +/- 110, Continuous 360 Deg., (24) 137" x 59" pallets, HSK 63-80, 33k RPM, 120 ATC, 100 HP, Part Probing 2 Makino MAG3.EX 5-Axis High Speed HMC Cell with 22 Pallets MAKINO MAG3.EX Stock #:40495 Year:2014 Description:Makino Professional 5 5-Axis Control, 24 APC, 157.5” x 59.1” x 39.4” Travels, +/- 110, Continuous 360 Deg., (22) 137" x 59" pallets, HSK 63-80, 33k RPM, 120 ATC, 100 HP, Part Probing 40517-1 HAAS VF-4SS Stock #:40517 Year:2014 Description:50"X 20"Y 25"Z travels, 30hp, 12k rpm, 24 ATC, Midaco APC (factory installed), Renishaw probe, programmable coolant, 300 PSI TSC, 4th axis wired, WIPS, HSM, P-Cool, rigid tapping, high-speed machining, chip auger, Early power failure detection module 37173-95272 COPE EPT-120/16 Stock #:37173 Year:2013 Description:4.7” diam., PLC Allen Bradley control, 16:1 L/D, 8000 kg, 1:40.2, 200 HP 38382-103751 TORNOS ST-26 Stock #:38382 Year:2013 Description:9-Axis,7-Linear Axis + (2) C-Axis, 0.9"/1.0 Max. Diameter, Live tool, 10K RPM mm520 MATSUURA MX-520 Stock #:38717 Year:2013 Description:CT40, 60 ATC, 12k RPM, 5-axis, 24.8"X 22"Y 20"Z travels, with Matsuura G-Tech 31i CNC Control, 5-axis trunnion table, chip conveyor, Renishaw probing system, chip augers, air blow, programable high pressure coolant, programable chip blaster 38996d ENGEL SILICONE VICTORY 200/100 LIM Stock #:38996 Year:2013 Description:100 TON 3.3 OZ ENGEL MODEL VICTORY 200/100 LIM SILICONE INJECTION MOLDING MACHINE MFG 2013 2013-vr11b HAAS VR11 Stock #:39469 Year:2013 Description:120” X 40” x 30”, 5-Axis, 30 HP, 15,000 RPM CT 40, Chip Auger, High Speed Machining, Rigid Tapping, Programmable Coolant makino-mag1 MAKINO MAG1 Stock #:39532 Year:2013 Description:Makino MAG1 5-Axis High Speed Horizontal Machining Center, Makino Professional 5 5-Axis Control, 59.8” x 43.3” x 53.1” Travels, +/- 110, Continuous 360 Deg., 31.5” x 29.4” Pallets, HSK63/80, 120 ATC, 33k rpm, 107 hp, T.S.C. Part Probing, New 2012 ysp-2 YSP VL-2500ATC+C Stock #:39640 Year:2013 Description:Fanuc 0i-TD control, 98" table, 118" max swing, 110" max turn diam., 67" max turn height, milling spindle, C axis, 16 Position ATC, s/n YS-3271, New 2013- Low Hours 39785-1 HWACHEON VESTA 1050B Stock #:39785 Year:2013 Description:Fanuc OiMD, 41.11"X 23.62"Y 23.62"Z travels, 25hp, 6,000 rpm, 50 Taper, ATC 24, chip conveyor, work light, spindle chiller, Midaco automated pallet changer 39879-1 DOOSAN PUMA 480 Stock #:39879 Year:2013 Description:Fanuc 32i Model A, 21" 3 jaw hydraulic chuck, chip conveyor, tool presetter, turret tool holders, 12 tool positions, 60hp, 1500rpm, 35.4" swing, 6.55" bar capacity [2] 2013 Temptek 10-Ton Portable Chiller TEMPTEK N/A Stock #:39995 Year:2013    40190-1 OKUMA LT3000 EX Stock #:40190 Year:2013 Description:CHUCK SIZE 12", BAR CAPACITY 3.14", SWING 21.66", 40HP, 4,200 RPM, OKUMA OSP-P300L, TWIN SPINDLE, (2) TURRETS, Y-AXIS, BIG BORE A2-8 SPINDLE, IGF PROGRAMMING, V-16 MULTITASKING TURRETS, MP HIGH PRESSURE COOLANT SYSTEM, SHOWER COOLANT, PARTS CATCHER, BARFEED INTERFACE, CHIP CONVEYOR, CHIP AIR BLOWER, TOOLING INCLUDED, 7545 HOURS 40393-1 FLOW MACH 4 3020C Stock #:40393 Year:2013    40480-8 SNK HGM-3500 Stock #:40480 Year:2013 Description:Fanuc 31i B5, 256"X 138"Y 39"Z travels, 100hp, 10k rpm, HSK-63A, has been used in the machining of airplane parts, 3469 hours 40559-16 KAO MING KMC-318HIS Stock #:40559 Year:2013 Description:FANUC SERIES 31i-MODEL B CNC control, 65” x 118” T-slot table, travels: X-127”, Y-66”, Z-33”, speeds to 10,000 RPM, CAT 50 taper, 60 station ATC, spindle oil chiller, chip conveyor, through spindle coolant 35941-87566 DTI FC300CNC Stock #:35941 Year:2012 Description:Siemens Sinumerik, 12" max OD x 105.7" L 36338-90541 SUPERTEC G38P-60NC Stock #:36338 Year:2012 Description:14" X 24", Programmable, metric 36342-92670 SUPERTEC G38P-60NC Stock #:36342 Year:2012 Description:14" x 24", auto, metric 37103-94732 COPE EPT-120/16 Stock #:37103 Year:2012 Description:4.7” diam., PLC Allen Bradley control, 16:1 L/D, 8000 kg, 1:40.2, 200 HP 37158-95373 FLOW MACH 4 4030C Stock #:37158 Year:2012 Description:10' X 13'1", 38215-104002 OKUMA LB35II-R/2000 Stock #:38215 Year:2012 Description:OSP-P200LA-R Control, 20" SMW Autoblok 500 BH Hydraulic Chuck, Programmable Tailstock, SMW Autoblok Hydraulic Steady Rest Model K4-ZSW- Midwest Location 38444-103508 PRIMA P-15408 Stock #:38444 Year:2012 Description:2012 175 TON X 13' PRIMA CNC PRESS BRAKE - Prima Adira 38560-104340 MONTEQUIPO H-20T Stock #:38560 Year:2012 Description:H-20T frame press, located in Monterrey 39063 MITUTOYO CRYSTA PLUS M574 Stock #:39063 Year:2012 Description:High precision CMM with Mcosmos and MH-20i probe head 1 YAMA SEIKI GA-3300 Stock #:39134 Year:2012    3 CURRENT EDM RT6050 Stock #:39144 Year:2012 Description:Tool changer, Guide Changer, 5-axis, Super Low-hours, R&D shop,Replacement cost $400k plus 2 TORNOS MultiAlpha 6x32 Stock #:39157 Year:2012    img-9784 LEITZ PMM-C 16.12.10 Stock #:39264 Year:2012 Description:62.9" x 47.2" x 39.4" travels, Quindos 7 & PC DMIS software, 4 Axis scanning, LSP Probe with 20 position styli rack, built-in rotary table dsc09472 YAMA SEIKI BM-1600 Stock #:39306 Year:2012 Description:Fanuc Oi-MD Control, Awea R/T, 63” x 31.5” x 31.5” Travels, CT 50, CTS, 8K RPM, 30 ATC, rebuilt spindle. 4 OMAX 80160 Stock #:39318 Year:2012    39442 WENZEL XORBIT 55 Stock #:39442 Year:2012 Description:Open DMIS s/w, Renishaw PH-10M auto indexing probe 3 KINGSTON CPX-2000 Stock #:39651 Year:2012    nissei-60-2-color-ac NISSEI 2-COLOR DCE60-2E Stock #:39693 Year:2012 Description:60 TON 0.60 OZ / 0.43 OZ NISSEI 2-COLOR DCE60-2EELECTRIC INJECTION MOLDING MACHINE MFG 2012 39820-2 AWEA BM-2100 Stock #:39820 Year:2012 Description:Travels (X,Y,Z) 82", 39.3", 39.3", 90" x 40" table size, 50 spindle taper, 10,000 rpm, 24 station ATC, linear scales, through spindle coolant, chip conveyor, spindle chiller, probing, Fanuc, 31IMB control 39857-1 MAZAK SLANT TURN NEXUS 550 Stock #:39857 Year:2012 Description:Mazatrol Matrix Nexus CNC Control, programmable tailstock, tool eye, 25" 4-jaw chuck, chip conveyor, coolant system 39881-1 DOOSAN PUMA 400C Stock #:39881 Year:2012 Description:Fanuc 32i CNC Control, 50hp, 1500rpm, 30.3" max swing, 12 turret stations, 6.5" bar capacity, 21" 3-jaw hydraulic chuck, chip conveyor, manuals img-9775 STRAMA MPS Ultrasonic Peening Machine Stock #:40130 Year:2012 Description:PLC-Siemens Simatic S7-300, Staubli Robot Control CS8C w/ handheld operator panel, RX 170 HP robot, rotating workpiece 40325-1 MAZAK VTC-800/30 SR Stock #:40325 Year:2012 Description:118"X 31.5"Y 28.35"Z travels, 137.8" x 31.49" table, CAT 40, ATC 30 47hp, 18K RPM, 16” rotary table with 16” chuck & tailstock, chip conveyor, mist collector, oil skimmer, 48 tools 40350a DOOSAN PUMA 2600LY Stock #:40350 Year:2012 Description:Live tooling, C&Y axes, SMW hydraulic steady rest, SCM 12” 3-jaw chuck, chip conveyor, Fanuc I-Series CNC controls 40394-2 SNK RB-300F Stock #:40394 Year:2012 Description:5-axis, 50 taper, 40hp, 6k rpm, Fanuc 30i CNC control, 30 tons, 246"X 150"Y 23"Z travels, 100 ATC, 78" x 236" table 40395-1 HERMLE B300U Stock #:40395 Year:2012 Description:Heidenhain TNC 530 CNC Control, 5-axis, 580psi cooling, HSK 63, ATC 30, 31.5"X 24"Y 20"Z travels, 15k rpm 40451-1 STAR ST-38 Stock #:40451 Year:2012 Description:12 axis, 14.75hp, 12k rpm, 1.5" max machining diameter. Includes FMB bar feed, does not include mist collector shown, oil based, fire suppression (no tank), 3 turret - all live stations, will include at least 2 static and 3-4 live tools for each turret. 40455-1 COMAU SMART-5 NM 16-3.1 Stock #:40455 Year:2012 Description:C5G control 40491-1 DMG MORI DMU 50 Stock #:40491 Year:2012 Description:Heidenhain iTNC530 control, 19.7"X 17.7"Y 15.7"Z travels, 46hp, 18k rpm, ATC 60, newer HSK-63 spindle, Cooljet CTS, laser tool setter 40503-1 HYUNDAI LV1400 Stock #:40503 Year:2012 Description:57.1" swing, 55.1" max turning dia, 9700 lb max table load, 50 hp, 2 step gear driven table spindle, box ways, 12 position tool changer, chip conveyor, 40" 3-jaw hydraulic chuck, work light, bed flushing, Fanuc 32iA CNC control 40511-1 NIIGATA HN-80D Stock #:40511 Year:2012 Description:Fanuc 30iA control, chip conveyor, coolant tank & pump, full 4th axis, CTS, 60.3"X 48.4"Y 40.1"Z travels, CAT 50 taper, 31.4" pallets, 50hp, 6k rpm. 60120b OMAX 60120 Stock #:40534 Year:2012    37172-95238 COPE EPT-120/16 Stock #:37172 Year:2011 Description:4.7” diam., PLC Allen Bradley control, 16:1 L/D, 8000 kg, 1:40.2, 200 HP 37465-96939 SNK RB-350 Stock #:37465 Year:2011 Description:285" x 177" x 23" travels, W_Axis 43", 6k rpm, 80 ATC 285" x 177" x 23" Trvls, Fanuc 30i-MA CNC Ctrl, Simultaneous 5-Axis Contouring Capability, Adjustable Crossrail, Dual Chip Conveyor, Automatic Tool Changer 38163-101197 YASKAWA MH1600 Stock #:38163 Year:2011 Description:120 KG PAYLOAD, 6-AXIS, 3058 MM HORZ REACH 38953 KRAUSS MAFFEI KM 180/380AX ELECTRIC Stock #:38953 Year:2011 Description:USED 198 TON 6.4 OZ KRAUSS MAFFEI MODEL KM180/380AX ELECTRIC INJECTION MOLDING MACHINE MFG 2011 img-5254 HAAS SL-40T Stock #:39141 Year:2011 Description:15" Samchully Chuck, 4" Bar, 40" Swing, programmable tailstock, manual tool presetter, belt-type chip conveyor, extended tool pocket, tool tray, high-pressure coolant 300psi, auxiliary coolant filter img-20201013-151506 DOOSAN PUMA 400C Stock #:39185 Year:2011 Description:Fanuc i, Samchully 21” Hydraulic chuck , 6.5" bar, tailstock, 2011 img-20201013-151506 DOOSAN PUMA 400 Stock #:39381 Year:2011    39516 BOURN & KOCH 400H Series II Stock #:39516 Year:2011 Description:Fanuc 31i 71" 39592-1 MAKINO A-71 Stock #:39592 Year:2011 Description:(2) Available Hydraulic Clamping, Makino Professional 5 CNC Control, B-Axis Gear-Driven NC Rotary Table, Thru Spindle Coolant System, 40 Position Tool Changer, Chip Conveyor and Tank, Chip Blaster Cutting Time Machine 1: 7579 hrs Machine 2: 7441 hrs 39726-2 DOOSAN VC 630-5AX Stock #:39726 Year:2011 Description:Heidenhain iTNC 530 Control, ATC40, 32hp, 30,000rpm, 24.8" x 24.8" table size 40016-1 MAZAK SUPER TURBO X-48MK11 Stock #:40016 Year:2011 Description:1300 watt resonator, 4' x 8' max sheet size, 661 lb max table load, 1/2" max thickness, Mazaktrol Preview control, shuttle table, Hyperchill chiller, Robo Vent dust collector, manufactured 2011, 12,473 hours 20210401-103150 BYSTRONIC BYSTAR 3015 Stock #:40205 Year:2011 Description:2011 Bystronic ByStar 3015 with a ByTrans Extended Material Handling System that has an 8 cartridge tower attached to it. 4.4 Kw CO2, 62.99” x 122.04” (5’3” x 10’2”) cutting area, approximately 35,516 cutting hours 40338-1 BLM LT722D Stock #:40338 Year:2011 Description:Siemens CNC control, 2kW IPG resonator, Donaldson dust collector, Riedel chiller 400-close CINCINNATI MTS400 Stock #:40348 Year:2011 Description:400 TON 30 OZ CINCINNATI MODEL MTS-400 INEJCTION MOLDING MACHINE MFG 2011 36345-92674 SUPERTEC G38P-60NC Stock #:36345 Year:2010 Description:auto, metric euro3 EUROMAC BX1000 Stock #:37899 Year:2010 Description:30 TON, 1000mm X 1250mm, CNC CONTROL, UNDER 500 HOURS 37974-100070 Z CORPORATION 650 Stock #:37974 Year:2010 Description:3D PRINTER 38490-103691 OKUMA VTM-120YB Stock #:38490 Year:2010 Description:Okuma OSP-P200L CNC Control,Table Diameter: 49.21",Live Milling with C-Axis 38491-103708 OKUMA MULTUS B 750W/4000 Stock #:38491 Year:2010 Description:OSP-P200L Ctrl, 41" Swing, 178" center dist., 24" chuck/18" sub chk, 80 ATC, B-axis mill head, Spindle chiller, image0 LOGIC SEAL LEAK STOPPER LS-100-1 Stock #:38928 Year:2010 Description:LOGIC SEAL MODEL LS-100-1 LEAK STOPPER MFG 2010 p4-rapid-granulator-a RAPID 814 SOLO Stock #:39121 Year:2010 Description:7.5 HP RAPID MODEL 814 SOLO GRANULATOR MFG 2010 6ad0752b-df50-4221-93db-f28cfda22fc3 GILDEMEISTER SPRINT 20 | 8 LINEAR Stock #:39183 Year:2010    45 MAZAK SUPER VELOCITY CENTER 2000L/200-II Stock #:39441 Year:2010 Description:4 axis with rotary table, 15,000 RPM spindle, BT40 spindle, 30 station ATC, coolant through spindle, chip conveyor, Renishaw OMM-2 optical tool check system, Renishaw OMP40-2 touch probe, Schunk Rota TB 600-275 4th axis horizontal 24" 3 jaw chuck dscf0435 MITSUBISHI Suprema Stock #:39468 Year:2010    10-hq150msy-1-1002 MAZAK HYPER QUADREX 150MSY Stock #:39504 Year:2010 Description:(2) 6" DIAMETER CHUCKS, 4 LIVE HOLDERS, ATS ML-565 BARFEED, AUTO TLM CHIP CONVEYOR, COMPARISON STOP CYLINDER, EIA 3D COMP., GEOMETRIC INCH/MM CONVERT, MAZATROL MATRIX 15'' COLOR CNC CONTROL, MIST COLLECTOR, PARTS CONVEYOR AND PART UNLOADER, SPIRAL STANDARD STATIC TOOL HOLDERS, THREAD TILTED WORKPLANE, VARIABLE 600 SETS 80x OMAX 80X Stock #:39845 Year:2010    39922-1 MAZAK SLANT TURN NEXUS 550-3000U Stock #:39922 Year:2010 Description:Maztrol Matrix with EIA, 12.1" color monitor/ EIA 3D COM, all available manuals, 41" swing, 24" chuck, 60 hp, 12 turret stations, SMW K5.1 prep [w/ bracket and shower coolant], Schunk TB-630-330 pneumatic chuck front comp, chip conveyor, all available tool holders image000000 STAR SA700S Stock #:40118 Year:2010 Description:STAR SERVO ROBOT MODEL SA-700S MFG 2010 (2)AVAILABLE 40216-1 KITAMURA MYCENTER HX1000I Stock #:40216 Year:2010 Description:Fanuc 16i-MB control, 39" pallets, full 4th axis, coolant through spindle, Cooljet high-pressurre coolant system, Renishaw probe, 150 ATC, chip conveyor, [70] BT50 tool holders, approx 16,629 hours. 20210210-175931 MOLLART MULTISPRINT Stock #:40249 Year:2010    20210210-175931 MOLLART MULTISPRINT Stock #:40255 Year:2010    40304-1 MORI SEIKI NH4000 DCG Stock #:40304 Year:2010 Description:15.7" pallet, 22"X 22"Y 24.8"Z travels, CAT 40, 60 ATC, 30hp, 14k rpm, Mori Seiki/Fanuc Model MSX 701 IV Control, through spindle coolant, Chip Blaster high pressure coolant unit, 2 pallets, programmable pallet, chiller, mist collector, chip conveyor 40330-1 HARTFORD TAIWAN PBM-135A Stock #:40330 Year:2010 Description:Fanuc Control, 5.1" Spindle Size, Geared Head. Coolant Thru Spindle, Table Size 63" x 55", Travels (X/Y/Z/W): 98.7"/78"/59"/29.5", 50hp, 2500 rpm, ATC 40, CAT 50 40337-1 BLM ADIGE LT8 Stock #:40337 Year:2010 Description:Siemens 840D CNC control, 3.5Kw resonator, dust collector, chiller, tilt cutting head, high-speed piercing/booster pulse, tube twist & bow correction, weld seam detector 40357-19 MAZAK MEGATURN NEXUS 900 Stock #:40357 Year:2010 Description:Mazatrol Nexus CNC control, 39.37” max. swing, 36.22” max. turning dia., 31.6” max. turning length,18.6” X, 34.49” Y-axis travels, 40 HP main spindle, 1,250 RPM, 31.5" 3-jaw chuck, 12 pos. boring bar changer, high pressure thru spindle coolant, 2-pallet changer 40398-1 HYUNDAI KH-80G Stock #:40398 Year:2010 Description:31.5" table, 49.2"X, 39.4"Y 33.5"Z travels, 34.8hp, 4500rpm, 709 IPM feed, 50 taper, Fanuc 31i CNC control, 80 ATC, chip conveyor, coolant through spindle 1k psi, all manuals 37781-98877 LEISTRITZ POLYMAT 70/500 CNC Stock #:37781 Year:2009 Description:SIEMENS FM 357 4 AXIS CAPABLE CNC, 2.75" MAX KEYWAY, 19.7" MAX CUT LENGTH 38462-103448 SUPERTEC G32P-60CNC Stock #:38462 Year:2009 Description:12"x24", FANUC 0i 09-dmc340u4p-2 DECKEL MAHO DMC 340 U Stock #:38860 Year:2009 Description:110"X133"X62", 15K RPM, +10°/-110° A-axis, 360 deg. C-axis, HSK-A100, 120 tools, no-ped COMAU SMART-5 NJ4 170-2.5 Stock #:39614 Year:2009 Description:Excellent condition and 2381 hours. Complete with robot, controller, cables to controller, teach pendant, teach pendant controller img-0039 COMAU SMART-5 NJ4 170-2.5 Stock #:39615 Year:2009 Description:Excellent condition, 1466 hours, pedestal, controller, cables to controller, teach pendant, teach pendant controller img-0002 KDM KTM-12/16F Stock #:39732 Year:2009 Description:8 Live Tool Hoiders, 7 Turning Tools, 40452-1 BOEHRINGER VDF DUS-630TI FLAT BED Stock #:40452 Year:2009    40463 NIIGATA HN-130D Stock #:40463 Year:2009 Description:Fanuc 30im, 52" pllts, CTS, 212 ATC, CT50 37183-95310 LK PT80U Stock #:37183 Year:2008 Description:80 TON 4.9 OZ LK MODEL PT80U INJECTION MOLDING MACHINE MFG 2008 38227-101678 OMAX 60120 Stock #:38227 Year:2008 Description:5' X 10', 30 HP 50,000 PSI PUMP, TILT-A-JET 38361-102734 DMG MORI DMU 100 MONOBLOCK Stock #:38361 Year:2008 Description:18,000 RPM, HSK-63, 49"X x 28"Y x 28"Z, Built in NC Rotary Table, Blum Laser Probe, High Pressure Through Spindle Coolant, ***Low Hours*** 38542-104137 FADAL VMC-4020 Stock #:38542 Year:2008 Description:40"X20", 20" img-20201013-144301 ADVANCE CL-38X3000 Stock #:39210 Year:2008    img-5699 DMG MORI NMV 8000 DCG Stock #:39261 Year:2008    39446-1 HAAS VF-9 Stock #:39446 Year:2008 Description:Haas VF-9 CNC Vertical Machining Center 1 AKIRA SEIKI SV550 Stock #:39521 Year:2008 Description:Akira Mi645 Controls, 20-ATC, CAT-40, 12,000 RPM, 20Hp High Torque Spindle Motor, Rigid Tapping, Easy Tool Setting, Quick Home, 3-D Graphics, Travels X=24", Y=17", Z=20", Programable Coolant 39792-8 SNK RB-200F 5-AXIS Stock #:39792 Year:2008 Description:206"X 114"Y 24"Z 33.5"W tapers, 25 hp, 6,000 rpm, ATC 40, BT50 taper, Fanuc 30iA CNC control, tool length measurement, tool broken detector 39828-6 GIDDINGS & LEWIS HMC 1250 Stock #:39828 Year:2008 Description:Siemens 840D CNC Control, 90-position automatic tool changer, coolant thru spindle, automatic pallet changer, Renishaw RMP60 probe, chip conveyor, prep for mist collector 39915 TEST EQUITY 1027C Stock #:39915 Year:2008 Description:27 C.F., -73 to + 175 Deg C 52-1 JET EDGE 55-150 Stock #:40041 Year:2008    20210401-103318 BYSTRONIC BYSTAR 4025 Stock #:40204 Year:2008 Description:2008 Bystronic ByStar 4025 with a ByTrans 6525 Load and Unload Material Handling System, 4.4 Kw CO2, 98.4” x 255.9” (8’2” x 21’4”) cutting area, approximately 57,042 cutting hours img-3853-mc011 KOYO KC500 Stock #:40267 Year:2008    40516-1 TEST EQUITY 1027C Stock #:40516 Year:2008 Description:Watlow F4 digital control, Workspace dimensions 40" x 36" x 32"H / 27 cubic feet, temperature range -65 /+ 175 Deg C, Overall dimensions 49"W x 63"D x 74"H, Weight 1750 lbs 35212-83374 ZEKS 250HSGA500 Stock #:35212 Year:2007 Description:250 CFM 38284-102147 KELCO 48TBWHL Stock #:38284 Year:2007 Description:48" DIAMETER, 5,000 LB CAPACITY img-8993 BYSTRONIC BYSTAR 3015 Stock #:39137 Year:2007    39411k CHARMILLES ROBOFIL 440 CC Stock #:39411 Year:2007 Description:21.7" x 13.8" x 15.8" travels, Submerged cutting, AWT img-2184 MAKINO MAG3 Stock #:39530 Year:2007 Description:(2) Makino MAG3 5-Axis High Speed Horizontal Machining Cell, with 12 A.P.C. Pallet System, Makino Professional 5 5-Axis Control, 118.1” x 59.1” x 39.4” Travels, +/- 110, Continuous 360 Deg., 118” x 59” Pallets, HSK 63, 33k RPM, 60 ATC, 80 HP, Part Probing, as New as 2004 4 FLOW I4400 Stock #:39563 Year:2007    waterjet MITSUBISHI DX4000 SUPREMA Stock #:39617 Year:2007    39744-1 MAZAK QTN350-II Stock #:39744 Year:2007 Description:Mazak Matrix CNC control, 12" hydraulic chuck with 3 jaws, tool pre-setter, chip conveyor, tailstock with live center, ID tool holders included. 40084-3 FIDIA GT-2510/6 Stock #:40084 Year:2007 Description:Bridge Type CNC Vertical Machining Center, Fidia C-20 CNC control, 236"X 98"Y 55"Z travels, 24k rpm, ATC 24, HSK 63A, 98" x 275" table 40098a DECKEL MAHO DMU 80P DUOBLOCK Stock #:40098 Year:2007 Description:48 ATC, CAT-50 taper, 15,000 rpm, 33.5 HP 1/4" X 10' KRRAS HYDRAULIC SHEAR KRRAS RAS 609 Stock #:40295 Year:2007    40312-6 MORI SEIKI NT5400/1800SZ Stock #:40312 Year:2007 Description:Mori Seiki MSX 711 II control, 80 ATC, 60hp, 2400rpm, [2] 15" chucks, 36.2" turning diameter, 75.6" turning length, 4" bar capacity, chip conveyor, lower 12 station turret, Capto 8, Renishaw probing, CoolJet CTS, DXF Software option 40358-1 MORI SEIKI NT-5400 DCG-1800SZ Stock #:40358 Year:2007 Description:MXS-711 III CNC control, 36.2” max. turning dia., 75.6” max. turning length, 2,400 RPM integrated spindle motor w/ C-axis, 8,000 RPM max. rotational speed. of turning/milling spindle, 80-tool pockets, Capto C8 tooling, simultaneous 5-axis machining, 1,000 PSI Chip Blaster high pressure coolant, dual 19.5" SMW power chucks, milling on Turret 1 40359-26 MORI SEIKI NT-5400 DCG-1800SZ Stock #:40359 Year:2007 Description:MXS-711 III CNC control, 36.2” max. turning dia., 75.6” max. turning length, 2,400 RPM integrated spindle motor w/ C-axis, 8,000 RPM max. rotational speed of turning/milling spindle, 80-tool pockets, Capto C8 tooling, simultaneous 5-axis machining, 1,000 PSI Chip Blaster high pressure coolant, dual 18" power chucks, milling on Turret 1, CoolJet coolant pump, 8,956 spindle hours 40396-1 HERMLE C30U Stock #:40396 Year:2007 Description:Heidenhain TNC 530 CNC Control, 25.6"X 24"Y 20"Z travels, 10k rpm, 5-axis, 1160psi cooling, HSK 63, ATC 32/43 img-1173 OKUMA V80R Stock #:40432 Year:2007 Description:OSP-P200L control, 2-axis, 39" swing, 31.5" max turning diameter, approximately 30" chuck, CC, SN 7022 & 81190, new 2007 40470-1 MORI SEIKI DURAVERTICAL 5060 Stock #:40470 Year:2007 Description:Mori MSX-504III control, 23.6"X 20.9"Y 20.1"Z travels, 20hp, 10k rpm, ATC 30, Cat40 taper, low hours 40472-11 MATSUURA MAM72-63V Stock #:40472 Year:2007 Description:FANUC 30i control, 30"X 33"Y 26"Z travels, CAT40, 12k rpm spindle, twin pallet with 2 extra pallets, LOADED Laser tool setter, 120 tools (wine rack is expandable to 240), thru tool coolant rigid tapping, tool radius comp for 5-axis machining, tolerance control, MAYFRAN conveyor caps1 FLOW I6012 Stock #:40527 Year:2007    40558-1 PROMAC ZEPHYR VTR 1.2 Stock #:40558 Year:2007 Description:Heidenhain TNC 530i control, 67"X 39"Y 27"Z travels, 15k rpm, 40hp, HSK A63 taper, 32 ATC, chip conveyor, coolant, double pinion axis drive, full enclosure, full 5-axis machining to a negative angle, tool probe, recently replaced linear bearings Z-axis 34328-77290 PRESTON EATON PA10HD12 Stock #:34328 Year:2006 Description:Preston Eastin PA-10 HD12 Welding Positioner Cell, Headstock, tailstock, weld carriage, Miller TIG welder & control 37278-95993 KRRAS RAS 3713 Stock #:37278 Year:2006 Description:1/2" X 12', HYDRAULIC. AUDEMI PGP-401 TOUCH-N-GO B.G. CONTROL 37436-96924 TECHNI TECHJET 3000-X2 Stock #:37436 Year:2006 Description:5' X 10', 50 HP 60,000 PSI KMT INTENSIFIER NEW PUMP HOUSING, NEW PUMP & CHILLER NEW BELLOWS ONE YEAR AGO belmont-s36 BELMONT MAXICUT S-36 Stock #:37835 Year:2006 Description:CNC, 14.9" x 11" 13.7" x 13.7, 30 AMP, 38066-100643 JET EDGE 21X13 MR Stock #:38066 Year:2006 Description:13' X 21', 90,000 PSI DUAL PUMP, NEW GANTRY, DI CONTROLLER, CHILLER 2016 38207-101572 SNK RB-210M Stock #:38207 Year:2006 Description:Fanuc 18iMB control, 138"x94"x23"x43", 118"X59" table, 6000 rpm, 40 ATC, 5 deg angle head img-0586 DOOSAN PUMA 300LC Stock #:39331 Year:2006 Description:12” Samchully hydraulic chuck, 15" max turn diam, 4" bore 10-2 TOYODA FA-800S Stock #:39359 Year:2006 Description:Fanuc 16Mi, 43"x45"x45", CAT50, 120 ATC, 6k rpm, 60 HP, 2006 2006 SNK HPS-120B/5 SNK HPS-120B/5 Stock #:39410 Year:2006 Description:2006 SNK HPS-120B/5 5 axis high speed CNC Horizontal Machining Center Profiler, Fanuc 15i-m control, 120” x 48” table/pallet size, Travels: X 124”, Y 51.9”, Z 27.5”, 4th and 5th +/- 100 deg., 15,000 rpm, 60 ATC, cat 50 spindle, 67 HP, includes Donaldson Torit 3 hp fume extractor model WSO 25-1, sn K2852 [Centra Cambridge] [Rigger must be approved by client] 1-1 MAZAK CYBERTECH TURN 4500M Stock #:39511 Year:2006 Description:80" Max length, Live Tooling, High Pressure Coolant, Chip Conveyor, Programmable Tailstock 20210202-134835 TRUMPF L3030 Stock #:39522 Year:2006    img-2196 INGERSOLL H-18 HSM POWERMILL Stock #:39533 Year:2006 Description:(2) Ingersoll H-18 HSM Powermill 5-Axis Horizontal Machining Center, Siemens CNC Control, 256" x 71" x 39" Travels, HSK 63, 24k RPM, 100 HP, 100 ATC, Nine Pallet APC Pallet System, New 2006 39644-2 ENSHU JE50S Stock #:39644 Year:2006 Description:12k rpm, 19.7"X 19.7"Y 19.7"Z travels, 1 degree indexing, Through Spindle Coolant, Probing ,CAT40, ATC40 39899 JSW VERTICAL JT40SELIII Stock #:39899 Year:2006 Description:44 TON .5 OZ JSW MODEL JT40SELIII VERTICAL ELECTRIC INJECTION MODLING MACHINE MFG 2006 39965-2 CINCINNATI H5 800 Stock #:39965 Year:2006 Description:5-axis, 6 pallet, 61"X 47.8"Y 47.2"Z travels, 180 degree A-axis, 24K rpm, CTS, HSK63, 90 ATC, CC Acramtic 2100 Control, all available manuals 40381-4 MITSUI SEIKI VERTEX 550 5X Stock #:40381 Year:2006 Description:Fanuc Series 31i Model A5 CNC Control, Trunion Table, 21"x23"x17", Cat 40, 60 ATC, 400 mm table, gear drive, Chip Conveyor Coolant Unit, 15,000 RPM 40383j SODICK K1C Stock #:40383 Year:2006    40388a CINCINNATI MTR633-5524 Stock #:40388 Year:2006 Description:CINCINNATI MILACRON ROBOT MODEL MTR633-5524 MFG 2006 sumitomo-180-zg SUMITOMO SE-180DU-C510 Stock #:40512 Year:2006 Description:198 TON 6.8 OZ SUMITOMO MODEL SE180DU-C510 ELECTRIC INJECTION MOLDING MACHINE MFG 2006 9e7c400d-0a1d-4434-a1ea-02e7bed8966d OKUMA MA 600HB Stock #:40560 Year:2006 Description:Fastems FMS System, 200 ATC per machine, Loaded 37334-96251 KRRAS BEND 70.30 Stock #:37334 Year:2005 Description:75 TON X 10', CNC B.G. 1 NAKAMURA TOME WT-300 Stock #:38679 Year:2005 Description:Fanuc 18i-TB, 11" Swing, 10" chuck, 2.5" bar, Tri-Mist, Chip conv. waterjet1equip FLOW AF 2080 Stock #:38733 Year:2005    img-3751 ARBURG 2-COLOR 570C2000-800/60 Stock #:39692 Year:2005 Description:220 TON 6.2 OZ/0.6 OZ ARBURG MODEL 2-COLOR 570C2000-800/60 INJECTION MOLDING MFG 2005 1 DOOSAN 400 LB Stock #:39790 Year:2005 Description:Fanuc 18T, 18" Chuck, 21.7" Turning Dia, 27.5" Swing, 82.4" Max Length, 4.62" Bar, 2,000 rpm, Steady Rest, Tool Pre-Setter, Rear Chuck, Programmable Tailstock, Chip Conveyor ALL TOOLING & CHUCKS Pictured 39905-3 OKK HM1250S Stock #:39905 Year:2005 Description:Fanuc 310iS Model A control, 49.2" pallets, 8k RPM, CT50, 80 ATC, coolant through spindle, New approximately 2005 40139-16 MAZAK VORTEX 1400/160-II Stock #:40139 Year:2005 Description:5-Axis VMC, Fanuc 15iM, 18K RPM, HSK63, 60 ATC, New 2005 9 MAZAK VORTEX 815/120 Stock #:40173 Year:2005 Description:5-Axis, 13K RPM, Fanuc 31i 40272j AGIE CLASSIC 3S Stock #:40272 Year:2005 Description:20" x 14" x 17" AWT, Sub, Agievision 4, 7244 cut time hrs 38586-104548 FIDIA GT2514/6 Stock #:38586 Year:2004 Description:236"x98"x55", 24k rpm, HSK63A 20210215-112645 ARBURG 170U180-70U Stock #:39679 Year:2004 Description:20 TON .34 OZ ARBURG MODEL 170U180-70 U FRAME INJECTION MOLDING MACHINE MFG 2004 40057-3 +GF+ MIKRON HSM 800 LP Stock #:40057 Year:2004 Description:31.5"X 23.6"Y 19.7"Z travels, ATC 30, 43hp, 36k rpm, pallet changer, 18 bar coolant, Scrapper chip conveyor, iTNC 530, oil mist spray unit, graphite dust removal unit, cooling fan and filtering system, machine enclosure, air blaster. New spindle 6/2019 20210601-092054 BYSTRONIC BYSTAR 4025 Stock #:40206 Year:2004 Description:2004 Bystronic ByStar 4025 with a ByTrans 6525 Load and Unload Material Handling System, 4 kW CO2, 98.4” x 255.9” (8’2” x 21’4”) cutting area, approximately 57,505 cutting hours before decommissioning 40324-1 MAZAK INTEGREX E-500H-S-1500U Stock #:40324 Year:2004 Description:32.28" swing, 40hp, 3300 rpm, 34.25"X 60"Y 19.68"Z travels, CAT 50, 80 ATC, Mazatrol 640M Pro CNC control, E Tower arrangement, universal head, opposed spindle 40336-1 BLM ADIGE LT-803D Stock #:40336 Year:2004 Description:2500 watts, max bar length 21.3", 9-axis, Siemens 840D control, Rofin Sinar resonator, tilting cutting head, parts conveyor, chiller, autoloader, dust collector img-9552 HAAS VF-7/50 Stock #:40392 Year:2004 Description:84"X 32"Y 30"Z travels, 30 hp, 7500 rpm, side mount ATC 30, tool tray for 50 taper toolholders, PCool 50 taper kit, high-intensity lighting, coolant chip sweep system 40488-1 DMG DMC 125U LS5 Stock #:40488 Year:2004 Description:Heidenhain Millplus Control, 49" x 34" x 31", HSK 100 taper, 7 pallet machine, 180 tools, 10k rpm, Renishaw probe, Blum laser, large spare parts package, last of 7 machines, New spindle 2017, Prototype shop 20211202-145443 TOSHIBA ISG950WV10-59B Stock #:40533 Year:2004 Description:935 TON 126 OZ TOSHIBA MODEL ISGT950WV10-59B WIDE PLATEN INJECTION MOLDING MACHINE MFG 2004 325-1 SODICK AQ325L Stock #:40555 Year:2004    37127-94884 ENGEL ES2550/500 Stock #:37127 Year:2003 Description:500 TON 50.4 OZ ENGEL MODEL ES2550/500 INJECTION MOLDING MACHINE MFG NEW IN 2003 38412-103303 CLAUSING METOSA CNC1760 Stock #:38412 Year:2003 Description:Fagor 8055-T Teach-In ctrl, turret 38445 HARDINGE GT-27SP Stock #:38445 Year:2003 Description:Gang tool, Fanuc 21i-TB, collet chuck 38471-103537 MITSUI SEIKI VL30-5X Stock #:38471 Year:2003 Description:15iM-B control, 8"x11"x8", 24 ATC, 50K RPM, HSK E-25, 5-AXIS 38483-103653 JOBS LINX HS-1 5-AXIS GANTRY Stock #:38483 Year:2003 Description:JOBS LINX HS-1 5-AXIS, GANTRY, SIEMENS 840D CONTROL, 244"X126"X50", A & C AXIS, 24K RPM mits-270 MITSUBISHI 270MSJ Stock #:40245 Year:2003 Description:270 TON 30 OZ MITSUBISHI MODEL 270MSJ INJECTION MOLDING MACHINE MFG 2003 machine-front-left-angle JSW ELECTRIC J95ELIII Stock #:40485 Year:2003 Description:93 TON 3.1 OZ JSW MODEL J95ELIII ELECTRIC INJECTION MOLDING MACHINE MFG 2003 img-7120 NISSEI NS-40-5A Stock #:40544 Year:2003 Description:40 TON 2.2 OZ NISSEI MODEL NS40-EA5 INJECTION MOLDING MACHINE MFG 2003 36251-89540 YUSHIN VNXII-400SL Stock #:36251 Year:2002 Description:1900 MM TRAVERSE STROKE,1000 MM KICK STROKE, 1100 MAIN ARM STROKE 3 VAN DORN 500SP4300 Stock #:37141 Year:2002 Description:500 TON 89 OZ VAN DORN MODEL 500SP4300 INJECTION MOLDING MACHINE MFG 2002 makino-a71-1-1 MAKINO A-71 Stock #:39059 Year:2002    39208 ZEISS CONTURA HTG 10/12/6 Stock #:39208 Year:2002 Description:VAST XT scanning probe, Calypso software updated in 2015 20200924-220734 HUSKY 2-COLOR HR650 RS55/50 Stock #:39243 Year:2002    111 HAAS SL-40 Stock #:40013 Year:2002 Description:3 Jaw Chuck, Tool Presetter, Chip Conveyor 40198 GANESH Deluxe GMV-1 Stock #:40198 Year:2002 Description:9"x42" tbl, V.S., DRO, 3 axis pwr feeds, PDB, 40214-1 MORI SEIKI ZL-200SMC Stock #:40214 Year:2002    40351-1 SNK HPS-120B/5 Stock #:40351 Year:2002 Description:120"X 52"Y 28"Z travels, 15k rpm, 40 ATC, 50 taper, 48" pallet, hydraulic tilt table, mist collector, chip conveyors, coolant system, handwheel, tool pre-setter img-7990 MATSUURA MC-2000V Stock #:40507 Year:2002 Description:80"X 30"Y 29"Z travels 36760-92781 CHEVALIER FSG-1224ADII Stock #:36760 Year:2001 Description:12" x 24" programmable DF 37461-96969 DEMAG 350/320-80 ET SYSTEM Stock #:37461 Year:2001 Description:38 TON 1.8 OZ DEMAG MODEL 350/320-80 ET SYSTEM, INJECTION MOLDING MACHINE WITH NC-4 CONTROL 37773-98826 DRI-AIR HPHM3 Stock #:37773 Year:2001 Description:30 LB/HR DRI-AIR DRYER MODEL HPHM3 38072-101389 SNK AIC-150 Stock #:38072 Year:2001 Description:Fanuc OM-C CNC Control, 157” x 106” x 39.3”, 60 atc, BT50 ASR-48-CR 6-SHELF LOAD/UNLOAD AMADA ASR-48-CR Stock #:38662 Year:2001    38767 STUDER S-30 LEAN PRO Stock #:38767 Year:2001 Description:Fanuc 16, Dual OD wheel + ID spindle, B & C axes 20200114-091947 FPT PRAGMA Stock #:38967 Year:2001 Description:Fidia Control, 5" spindle, 234"x78"x47", CAT50, 5k rpm, 22 Tools mits MITSUBISHI 3015LZP Stock #:39360 Year:2001    39567-1 HANWHA SL32HPII Stock #:39567 Year:2001 Description:The machine has (9) cutting axis and is Fanuc control (Series 18i-T) with Flood Coolant. Machine is very clean. 27,224 hours of cutting time and 22,344 of operating time. MTA Eagle 542 Bar Feeder (12') 40278-1 HAAS VF-8/50 Stock #:40278 Year:2001 Description:64"X 40"Y 30"Z travels, 20hp, 10k rpm, 24+1 ATC, CAT 50. Chip auger, coolant through spindle, wired for 4th axis. Note: cambox needs repair. jsw-310 JSW J310ELII ELECTRIC Stock #:40300 Year:2001 Description:310 TON 24.7 OZ JSW MODEL J310ELII ELECTRIC INJECTION MOLDING MACHINE MFG 2001 ranger-robot-r-11307-mc302 RANGER RT-500S3 Stock #:40318 Year:2001 Description:RANGER FULL SERVO ROBOTS MODEL RT-50033 AND RT-300S3 MUST MOVE MAKE OFFER husky-photo-8 HUSKY HL1000RS155/135 Stock #:40403 Year:2001 Description:1100 TON 296 OZ HUSKY MODEL HL1000RS155/135 INJECTION MOLDING MACHINE MFG 2001 engel-4 ENGEL E-MOTION 200/55 Stock #:40421 Year:2001 Description:HORIZONTAL,TIEBARLESS, 60t ELECTRIC MACHINE, 30mm SCREW, 82.8oz SHOT SIZE, MAX OPENING OF 25.409", HOURS 23,168 UNDER POWER 40528-8 FASTI 225-32-4 Stock #:40528 Year:2001    20211119-112310 TOYODA FA450III Stock #:40538 Year:2001 Description:23.6"X 23.6"Y 22.0"Z travels, 30hp, 14k rpm, 120 ATC 17.7" pallet, 500kg max load 37359-96391 TRUMPF TC500R Stock #:37359 Year:2000 Description:27. TON, 4' X 8', BRAND NEW LINEAR AMPLIFIER, NEW HYDRAULIC MAIN PUMP 37946-100103 AMADA VIPROS 255 Stock #:37946 Year:2000 Description:22 TON, 31 STNS. 3 A.I., 50" X 50", 18P img-4036 AMADA VIPROS 255 Stock #:38732 Year:2000    lot550-1 WFL M120 MILLTURN Stock #:38910 Year:2000 Description:840C Control, 44.88” Swing, 1600 rpm, 169 hp image0 SUMITOMO SH350C Stock #:39973 Year:2000 Description:385 TON 38.2 OZ SUMITOMO MODEL SH350C INJECTION MOLDING MACHINE MFG 2000 40117-1 MATSUURA MC-1000VG Stock #:40117 Year:2000 Description:30 x 2 tool pockets, Turbo Chip Conveyor, Tsudakoma 5-axis rotary table, Fanuc 16iM control, 15,000 rpm 646168801-003 YUSHIN NETLINER Stock #:40275 Year:2000 Description:YUSHIN MODEL VNll-EA-7000S NETLINER ROBOT VERY GOOD CONDITION REPLACE w/NEW WITH MORE OPTIONS 40311-1 HAAS VF-9 Stock #:40311 Year:2000 Description:84"X 40"Y 30"Z travels, 20hp, 7500rpm, CAT40, ATC 24, includes HRT rotary table with chuck img-6211 TOSHIBA ISG190V10-10B Stock #:40332 Year:2000 Description:190 TON 19 OZ TOSHIBA MODEL ISG190V10-10B INJECTION MOLDING MACHINE MFG NEW 2000 20211119-112713 TOYODA FA450III Stock #:40537 Year:2000 Description:23.6"X 23.6"Y 22.0"Z travels, 30hp, 14k rpm, 120 ATC 17.7" pallet, 500kg max load p1010003-2-20296 FLOW BENGAL 2X4 Stock #:28095 Year:1999 Description:2x4 37148b CINCINNATI E90-S-5PC-FS-SS Stock #:37148 Year:1999 Description:5 LB CINCINNATI ACCUMULATOR HEAD BLOW MOLDING MACHINE MODEL E90-S-5PC-FS-SS MFG NEW IN 1999 CAMAC 486 CONTROL 37613-97888 BIRLIK MSMS2030 Stock #:37613 Year:1999 Description:5/16" X 78.8" 3 ROLL HYDRAULIC 38099-100847 JOMAR 115 Stock #:38099 Year:1999 Description:111 TON JOMAR INJECTION BLOW MOLDING MACHINE 38175-101326 CINCINNATI VT300-34 Stock #:38175 Year:1999 Description:300 TON 34 OZ CINCINNATI INJECTION MOLDING MACHINE , VT300, CAMAC VSX CONTROL 38572-104512 JOBS JOMACH 32 Stock #:38572 Year:1999 Description:255"X70"X55",HSKA63, 6K RPM, overview PANDJIRIS HS-250 Stock #:39316 Year:1999    img-0587 DAINICHI DLX 65X2500 Stock #:39334 Year:1999 Description:Fanuc Series 20-T Control 122-1 WEBB CORPORATION 15L-1608 Stock #:39352 Year:1999    20210416-151758-resized NISSEI VERTICAL TD100C18ASE Stock #:39575 Year:1999 Description:100 TON 6.1 OZ NISSEI MODEL TD100C18ASE VERTICAL CLAMP INJECTION MOLDING MACHINE MFG 1999 amada-vipros-357-queen-1 AMADA 357 VIPROS QUEEN Stock #:39823 Year:1999    amada-apelio-367-iii-w-loader-2 AMADA APELIO 367 III Stock #:39826 Year:1999    39832-2 MAZAK VTC-200B Stock #:39832 Year:1999 Description:Mazatrol Fusion 640m CNC control, 57.4" x 20" table size, 44"X 20"Y 20"Z travels, CAT 40, 24 ATC, 20hp, 20k rpm 39868a ENGEL VERTICAL ES200V/85VRB Stock #:39868 Year:1999 Description:85 TON 2.3 ENGEL MODEL ES200H/55VRB VERTICAL CLAMP INJECTION MOLDING MACHINE MFG 1999 img-5277 TOYODA FA-1050 Stock #:39904 Year:1999 Description:Toyoda FA-1050 4 + 1 axis [1999], Fanuc 16i CNC Control, 41" pallets, 10,000 RPM, CT50, 120 ATC, coolant through spindle, probe, w/ Nikken B450FA 18" Rotary Table *Low Hours* vandorn VAN DORN ergo 25-80 Stock #:40399 Year:1999 Description:28 TON 1.4 OZ VAN DORN DEMAG ERGO 25-80 INJECTION MOLDING MACHINE MFG 1999 37873-99476 NICOLAS CORREA FP40/50 Stock #:37873 Year:1998 Description:Retrofitted: 2019 HEIDENHAIN iTNC-530 / SIEMENS 840D 38684 CHARMILLES ROBOFORM 4000 Stock #:38684 Year:1998 Description:C axis, ATC, Fire Ext 20200512-125108 JOHNFORD ST-40A Stock #:38768 Year:1998    20200427-143642 AMADA VIPROS 255 Stock #:38787 Year:1998    tc-1000 NISSHINBO MAP-1000 Stock #:39152 Year:1998    img-0591 DAINICHI DLX 65X2500 Stock #:39333 Year:1998 Description:Fanuc Series 20-T Control, 26" x 98" amada-vipros-358-king AMADA VIPROS 358 KING Stock #:39822 Year:1998    amada-astro-fab-iii-1253-1 AMADA Astro 100 Fab III-1253 Stock #:39825 Year:1998    img-9389 VAN DORN 230HT-1220 Stock #:40172 Year:1998 Description:230 TON 20 OZ VAN DORN MODEL 230HT-1220 INJECTION MODLING MACHINE MFG 1998 vf3333 HAAS VF-3 Stock #:40236 Year:1998 Description:7,500 RPM, Cat-40, 4-Axis, 5c Rotary Table, Renishaw Probe, Through Spindle Coolant, Programmable Coolant, Rigid Tapping, Mist Collector, Chip Auger 40310-1 HAAS VF-3 Stock #:40310 Year:1998 Description:40"X 20"Y 25"Z travels, 30hp 8100rpm, 20 ATC, 5C indexer autojector-40-pm AUTOJECTOR VERTICAL HCS-40 Stock #:40416 Year:1998 Description:40 TON 1.76 OZ AUTOJECTOR MODEL HCS40 VERTICAL CLAMP INJECTION MOLDING MACHINE MFG 1998 20210521-130135 CINCINNATI MAGNUM 800 Stock #:40433 Year:1998 Description:Acra 950 CNC control, 5 position pallet changer, 192 ATC, s/n 3144A0198-0001, 5 pallet pool, New 1998 img-3679 DAVIS & STANDARD MV35INDS35 Stock #:40539 Year:1998 Description:3 1/2" DAVIS STANDARD MODEL MV35INDS35 EXTRUSION LINE MFG 1998 img-3794-1 VAN DORN 300HT-1220 Stock #:40541 Year:1998 Description:300 TON 30 OZ VAN DORN MODEL 300HT-1220 INJECTION MOLDING MACHINE MFG 1998 img-2662 HUSKY G500RS60/50 Stock #:40549 Year:1998 Description:500 TON 16.2 OZ HUSKY MODEL G500RS60/50 INJECTION MOLDING MACHINE MFG 1998 38154-101165 AMADA APELIO 357V Stock #:38154 Year:1997 Description:33 TON, 58 STNS, 1,500 WATT PUNCH/LASER COMBO 38509-103870 VAN DORN ET 500-120 COMPACT Stock #:38509 Year:1997 Description:55 TON 2.9 OZ VAN DORN MODEL ET-500-120 INJECTION MOLDING MACHINE MFG 1997 USED 38529-104030 AMADA HFB1003 Stock #:38529 Year:1997 Description:110 TON X 38562-104354 MAZAK MTV-655/60B Stock #:38562 Year:1997 Description:4 axis, M-Plus 38852 CHARMILLES ROBOFIL 330F Stock #:38852 Year:1997 Description:15.75" x 11.8" x 15.75" travels, Fanuc control, Sub, AWT img-0924 ENGEL ES2000/400 Stock #:39275 Year:1997 Description:400 TON 50 OZ ENGEL MODEL ES2000/400 PLASTIC INJECTION MOLDING MACHINE MFG 1997 39319 ARBURG 221M350-75 Stock #:39319 Year:1997 Description:38 TON 1.4 OZ ARBURG MODEL 221M-350-75 INJECTION MOLDING MACHINE MFG 1997 39578-1 MITSUI SEIKI HU-63A Stock #:39578 Year:1997 Description:Fanuc 15M-CNC Control, pallet 630x 630 mm, 10 pallets, automatic tool changer: 60 pos. 39852-7 MAZAK HTC-400 Stock #:39852 Year:1997 Description:Mazatrol MPlus CNC, 22"X 20"Y 20"Z travels, CAT 40, ATC 24, 15hp, 10k rpm, 2 pallet changer, Mayfran chip conveyor, rigid tapping marv-hv800 MAZAK HV-800 Stock #:39867 Year:1997 Description:Mazatrol M-Plus CNC Control, 30hp, 4k rpm, 49"X 39"Y 41"Z travels, ATC 40, 31.5" x 31.5" pallet size flow-40 FLOW 40 HP Stock #:40003 Year:1997    40200 CINCINNATI MH300 Stock #:40200 Year:1997 Description:300 TON 29 OZ CINCINNATI MODEL MH300 INJECTION MOLDING MACHINE MFG 1997 40240a PARAGON RC-12 Stock #:40240 Year:1997 Description:1.6", coolant separator engel-100tlc ENGEL ES330-100TL TIE BARLESS Stock #:40346 Year:1997 Description:100 TON 5 OZ ENGEL ES330-100TL TIE BARLESS INJECTION MOLDING MACHINE MFG 1997 40410 MITSUI MSG-612CNC Stock #:40410 Year:1997 Description:Fanuc Mate 2 Axis control, CNC Vert & Cross, PM chuck 40429 FADAL VMC-15RT Stock #:40429 Year:1997 Description:88 control sumitomo-550zg SUMITOMO SH550A-C3750U Stock #:40447 Year:1997 Description:600 TON 100 OZ SUMITOMO MODEL SH550A INJECTION MOLDING MACHINE MFG 1997 img-3730 NISSEI FN-1000-12A Stock #:40540 Year:1997 Description:88 TON 5.3 OZ NISSEI MODEL FN1000 INJECTION MOLDING MACHINE MFG 1997 img-3721 NISSEI FN4000-36A Stock #:40542 Year:1997 Description:200 TON 14.8 OZ NISSEI MODEL FN4000-36A INJECTION MOLDING MACHINE MFG 1997 img-3756 TOYO TI-90H Stock #:40543 Year:1997 Description:90 TON 5.5 OZ TOYO MODEL TI-90H INJECTION MOLDING MACHINE MFG 1999 img-2963 TIMESAVER 137-2HD CMW Stock #:38683 Year:1996 Description:37" WET/DRY img-0574 NISSEI PS40E5A Stock #:39797 Year:1996 Description:40 TON 1.06 OZ NISSEI MODEL PS40EA5 INJECTION MOLDING MACHINE MFG 1996 39987 CINCINNATI VSX55 Stock #:39987 Year:1996 Description:55 TON .73 OZ CINCINNATI MODEL VSX55 INJECTION MOLDING MACHINE MFG 1996 operator-side ENGEL ES80/30HL Stock #:40120 Year:1996 Description:30 TON .7 OZ ENGEL MODEL ES80/30HL INJECTION MOLDING MACHINE MFG 1996 image000005 CINCINNATI E90-D-5C Stock #:40211 Year:1996 Description:5 LB DUAL HEAD CINCINNATI MODEL E90-D-5C ACCUMULATOR HEAD BLOW MOLDING MACHINE MFG IN 1996 toshiba-1450-th1 TOSHIBA ISF1450V10-110B Stock #:40219 Year:1996 Description:1430 TON 250 OZ TOSHIBA MODEL ISF1450V10-110B INJECTION MOLDING MACHINE MFG 1996 img-7840 OKUMA MCR-BII 2.5 Stock #:40234 Year:1996    36259-89751 HENRI LINE MACBORMILL 235 HS Stock #:36259 Year:1995 Description:6-axis, Fanuc 15M, 721" x 140" x 44", W, B, and C axes cjs2 AMADA VIPROS 358 KING Stock #:37702 Year:1995 Description:33 TONS, 58 STNS. 2 A.I., FANUC 04PC 38486-103761 SUMITOMO SH220A Stock #:38486 Year:1995 Description:220 TON 13 OZ SUMITOMO resized-p NAKAMURA TOME SL-H Stock #:39722 Year:1995 Description:Fanuc Control, Var Feeder, 4,500rpm, 12 Station Turret, Tail Stock 6-dual-3lb-2 STERLING DUAL HEAD Stock #:40210 Year:1995 Description:3 LB DUAL HEAD STERLING ACCUMULATOR HEAD BLOW MOLDING MACHINE MFG 1995 40322 VAN DORN 300HT Stock #:40322 Year:1995 Description:300 TON 30 OZ VAN DORN MODEL 300HT-30F INJECTION MOLDING MACHINE MFG NEW IN 1995 850-5 CINCINNATI VH850-181 Stock #:40439 Year:1995 Description:850 TON 181 OZ CINCINNATI MODEL VH850-181INJECTION MOLDING MACHINE MFG 1995 40038 AGIE AGIECUT SPRINT 20 Stock #:40038 Year:1994 Description:Agiepuls HMC, AWT, Sub 40290 HMTW HZ-1624 Stock #:40290 Year:1994 Description:16" x 24" 3 axis Auto Hyd, OTW dress, DRO 38534-104051 TOS HOSTIVAR BUB 50-1500 Stock #:38534 Year:1993 Description:20" X 60", ID 38570-104436 JOBS JOMACH 32 Stock #:38570 Year:1993 Description:Fidia C20 , 236"X70"X55". 6K PRM, HSK63 capture HPM 1100 Stock #:39328 Year:1993 Description:1100 TON 160 OZ HPM INJECTION MOLDING MACHINE MFG 1993 63234216700-cbb53095-1fc3-4f49-998f-51da6e9544e3 AMADA RG-100 Stock #:39436 Year:1993    112-8 MAZAK MAZATECH H-500/50 Stock #:39907 Year:1993 Description:Mazak H-500/50N 4-Axis, Mazatrol M32 ctrl, 6 pallet APC, 19.7" pallets, CT50, 120 ATC 40409 MITSUI MSG-200MH + Unison Dedtru Stock #:40409 Year:1993    40424e TANNEWITZ G1NE Stock #:40424 Year:1993 Description:35.5" throat, Hyd table, AC drive 40430 SANTEC LC-50RVS Stock #:40430 Year:1993 Description:Bed Type, DRO, Power X feed 36297-89850 TOSHIBA ISF60PSII1.5B Stock #:36297 Year:1992 Description:60 TON 2.3 OZ TOSHIBA INJECTION MOLDING MACHINE MFG 1992 36298-89847 TOSHIBA ISF90PSII Stock #:36298 Year:1992 Description:90 TON 5 OZ TOSHIBA MODEL ISF90SII INJECTION MOLDING MACHINES MFG 1992 36423-90451 SNK PC-60V Stock #:36423 Year:1992 Description:Fanuc 11M, 5K RPM, 24 ATC Location: Wichita, KS 37738-98536 FARREL HEAVY DUTY Stock #:37738 Year:1992 Description:Fanuc 0iTD Control, 17' Swing , 16' Chuck, Retrofitted to CNC 2016 38742 MITSUI SEIKI J6CN-11 Stock #:38742 Year:1992 Description:Fanuc 11M, tool changer 39682-1 United McGill UW Stock #:39682 Year:1992 Description:Max Allowable Working Pressure: 330psi at 700 deg F Min Design Metal Temp: -20 deg F at 330psi 12" x 10" x 34" interior dimensions img-3607 MORI SEIKI SL-25A Stock #:40092 Year:1992    40119l CINCINNATI VL3000 Stock #:40119 Year:1992 Description:3000 TON 769 OZ CINCINNATI MODEL VL3000 INJECTION MOLDING MACHINE MFG 1992 5-sngl-5lb-2 STERLING SINGLE HEAD Stock #:40209 Year:1992 Description:5 LB SINGLE HEAD STERLING ACCUMULATOR HEAD BLOW MOLDING MACHINE MFG 1992 wti-okmaoto-acc-1632dx OKAMOTO ACC1632DX Stock #:40408 Year:1992 Description:16" x 32" fine pole electro mag chuck, OTW dresser 20201211-112619 AMADA PEGA 367 Stock #:39354 Year:1991    40404-2 STERLING DUAL HEAD Stock #:40404 Year:1991 Description:2 LB DUAL HEAD STERLING ACCUMULATOR HEAD BLOW MOLDING MACHINE MFG 1991 img-1078 AMADA PEGA KING 345 Stock #:39382 Year:1990    image000001 ENGEL VERTICAL 240/125VHRO Stock #:39866 Year:1990 Description:125 TON 10.3 OZ ENGEL MODEL VERTICAL 240/125VHRO INJECTION MOLDING MACHINE MFG 1990 138-1 DECKEL FP4NC Stock #:40224 Year:1988 Description:Deckel FP4NC CNC Vertical Machining Center, Universal Head, Dialog 11 Control, CAT 40, CAT 40 tool holders w/ Criterion boring heads, New 1988 38536-104084 TACCHELLA GRINDIFLEX S28V-31/30"X7-A Stock #:38536 Year:1987 Description:26" X 120", Siemens ctrl, Mapross gauge 20201022-145026-resized PIETRO CARNAGHI AC12 Stock #:39242 Year:1987    38355-102631 GIDDINGS & LEWIS 72" Stock #:38355 Year:1986 Description:84" Sw., Fanuc 11TT, 72" U/R, TH & SH 38652-104890 WELLS B-25III Stock #:38652 Year:1986 Description:25"H X 40"W, SEMI-AUTO WITH INFEED TABLE coma-567-con-auto-index-serie-c67538 AMADA COMA 567 Stock #:38875 Year:1986    38439-103285 SCHUTTE AF26 Stock #:38439 Year:1985 Description:Siemens Sinumerick System 3 PLC Control, 8-Position Automatic Bar Loader 38619-104655 NAKAMURA TOME SLANT 3B Stock #:38619 Year:1985 Description:Video Available 36770-92853 MYFORD MG-12M Stock #:36770 Year:1982 Description:5" x 12", Hand feed, ID spindle, DRO, 37026-94305 EITEL RP60 Stock #:37026 Year:1982 Description:60 ton, 8" stroke, 13.75" throat, OB supports img-7603 IMPROVED B24 Stock #:39739 Year:1980 Description:2.5 LB DUAL HEAD IMPROVED BLOW MOLDER MODEL B24 MFG 1980 38977 GIDDINGS & LEWIS BICKFORD HC Stock #:38977 Year:1978    36616-92249 CINCINNATI 3DL Stock #:36616 Year:1970 Description:3/8" x 12', HYDRAULIC 40287 CINCINNATI OL Stock #:40287 Year:1964 Description:10" x 24", ID spindle, DRO, Pick-feed 40274 CARLTON 5A Stock #:40274 Year:1961    31858-69352 DIACRO 36" Stock #:31858    Description:36" MNL 34345-77680 BLUE M POM7-206G-HI Stock #:34345    Description:650 Deg F, 20"x19"x19.75" Elect, 34349-77574 SECO GF41-HG Stock #:34349    Description:1800 Deg F, Electric Box Furnace, 24"x24"x36" 35973-87832 SYKES 4B Stock #:35973    Description:Max Blank 52” Dia 18” Max Face width Herringbone 10” Max Face Width Spur / Helical Work Spindle Bore 9” 35984-87834 SYKES 5B Stock #:35984    Description:Max 66” Blank, 15" Spindle Bore 35985-87835 SYKES CS2 Stock #:35985    Description:25" MAX BLANK, 3 5/8 " SPINDLE BORE 37075-94619 AMERICAN MSI HOT RUNNER CONTROL Stock #:37075    Description:24 ZONE HOT RUNNER CONTROL 37807-99154 TAYLOR WINFIELD PT3 170 36 Stock #:37807    Description:170 KVA, 36" THROAT, 12" GAP. MIYACHI ISA 1000 CONTROL, JANDA REBUILD R3067 38161-101181 DOALL C-305A Stock #:38161    Description:auto 38234-101729 DALIAN CW6280E/3000 Stock #:38234    Description:32" x 120", I/M trdg, 3.9" bore, 20.5" OCS 38299-102494 TORNOS BS20 Stock #:38299    Description:21mm Max. Dia., Spindle Speeds to 6,000-RPM, 1-Sub Spindle, 8-Cross Slides, Monoblock Collet, with 8-Spindle Automatic Bar Loader, Coolant System, Parts Chute, Push Button Control, Barns Model RD-108 Chip and Coolant Separator, S/N RD-927 38301-102506 TORNOS BS20 Stock #:38301    Description:21mm Max. Dia., Spindle Speeds to 6,000-RPM, 1-Sub Spindle, 8-Cross Slides, Monoblock Collet, with 8-Spindle Automatic Bar Loader, Coolant System, Parts Chute, Push Button Control 38368-102835 RANSOHOFF IMMERSO JET Stock #:38368    Description:42"w AQUEOUS PART CLEANER WITH DRYER kitigawa-bro KITAGAWA BR032RA11J Stock #:38432    Description:12.6", Fanuc, 12" 4J chuck, tailstock, 4" bore 38436-103284 UNKNOWN IW 80/150 BTD Stock #:38436    Description:150 38574-104441 HARDINGE CONQUEST T51 Stock #:38574    Description:Conquest T51 38599 OKAMOTO LINEAR 612 Stock #:38599    Description:6"x12" HF, pm chuck 38602 MYFORD MG-12HA Stock #:38602    Description:hyd table 5"x12" g-l-7 GIDDINGS & LEWIS 70' Stock #:38706    Description:Consists of (2) G&L's, price is per machine image0 NOVATEC VR-5 RECEIVER Stock #:38719       image0 NOVATEC VR-5 VACUUM RECEIVER Stock #:38720       38777 OSTLING Lasonall Stock #:38777    Description:254mm Lens, Programmable , Rotary workpiece shuttle 38842 CINCINNATI DD-300 Stock #:38842    Description:USED 300 LB CINCINNATI MODEL DD-300 PLASTICS MATERIAL DRYER WITH 2000 LB HOPPER 3 AUTOSPIN 3-Axis 2-Roller Stock #:38915    Description:Siemens 840 DSL control 5 MJC 250 Stock #:38916       image2 HUSKY HOT RUNNER CONTROL DELTA 2X8 Stock #:38926    Description:4 ZONE HUSKY MODEL DELTA 2 X8 HOT RUNNER CONTROL hs-250 PANDJIRIS hts-200 Stock #:39313       79888949-10214888683160295-2165599927428710400-n ATLANTIC HDE 10X1/4 Stock #:39339       img-0418 MAGUIRE WSB-221 Stock #:39439    Description:MAGUIRE MATERIAL BLENDER MODEL WSB-221 59 UNA-DYN UDC-55 Stock #:39455    Description:55 LB/HR UNA-DYN DRYER MODEL UDC-55 39487 DEA SWIFT A001 Stock #:39487       39514 WENZEL LH 87 GEAR Stock #:39514    Description:31.5" max gear diam, Gear measuring CM software, built-in rotary table img-7486-002 PINES 107 NC Stock #:39569       rize-one-printer RIZE ONE Stock #:39626    Description:Priced per unit. Color touch-screen, monitoring camera, on-board storage, voice assistant, auto bed-levelling, auto nozzle-cleaning xrise-3d-printer RIZE XRIZE Stock #:39627    Description:5" high-resolution touch-screen, 3GB internal storage, auto-levelling magnetic build plate, w/ Xrise Starter Kit. rize-one-printer RIZE ONE Stock #:39628    Description:Rize One 3D printer, desktop model, w/ 3-piece stand and Rize One starter kit 20210118-144854 CIDAN VG5000-4 Stock #:39672       img-20190709-072235845 FELL-FAB SILO Stock #:39701    Description:FELL-FAB BAG SILO 39717 ELTEE TRM-21 Stock #:39717       39737 SUPERMAX YCM-2GS Stock #:39737    Description:11" x 51" table, 5 HP Vert. & Horiz. spindles, img-1252 SUNNEN MBB-1650 Stock #:39743       capture1 KITAMURA MYCENTER Mycenter 4 Stock #:39753    Description:Cat-40, 10,000rpm, 44.3″X, Y-22.2″Y, 22.4″Z, Chip conveyor 39814-3 HAEUSLER FKB CNC Stock #:39814       39843-1 SIP MP-5E Stock #:39843       img-1824 HYUNDAI KIA UNKNOWN Stock #:39862       39882-1 OKK KCH500 Stock #:39882       39883-1 HITACHI SEIKI VK55 Stock #:39883    Description:2 available 39884-1 HITACHI SEIKI VK65 Stock #:39884       39913-1 HAAS HRT310 Stock #:39913       39956-1 MAZAK INTEGREX E-500H II Stock #:39956    Description:Mazatrol Matrix CNC control, tailstock, 40hp, 3300rpm, 120" machining length, 32.3" turning diameter, 16" chuck 39957-1 SHARNOA HPM-85 Stock #:39957    Description:Mint condition machine with low hours. Controller was upgraded with updated PC and Windows 98 OS 39958-1 SUNNEN MBB-1290D Stock #:39958    Description:Model: BB-1290 D Serial: 9127 Voltage: 575V, comes with stones, tooling and manual. 39959-1 BRITISH CLEARING F-4350-108 Stock #:39959       39960-1 CLEARING F-2250-96 Stock #:39960       lns-qls80s2 LNS QL SERVO S2 Stock #:39963    Description:DIA MIN 0.236" 6MM, DIA MAX 3.15" 80MM, BAR LENGTH 13.78" TO 63", X OR Z-AXIS RETRACT TRAVEL 23.6" 600MM [2] Mitsubishi FGC30N Forklift MITSUBISHI FORKLIFT FGC-30 Stock #:39992       Clark AU-248 Forklift w/ 9226 Hours CLARK AU-248 Stock #:39997       Gorbell Jib Crane, 500 lb Capacity GORBELL N/A Stock #:40115       67-1 AEC PCA 050 Stock #:40152    Description:1/2 TON AEC MODEL PCA-50 CHILLER MFG 2014 Jefferson Electric Cat No 423-9217-000 Transformer JEFFERSON ELECTRIC 423-9217-000 Stock #:40168    Description:Jefferson Electric Dry Type Energy Efficient Transformer, Cat No 423-9217-000, 45 KVA, 3 phase/60Hz, 240->480 General Signal Transformer Cat No T5H15S GENERAL SIGNAL T5H15S Stock #:40169    Description:General Signal Transformer Cat No T5H15S, 15 KVA/3 phase/60 Hz240->480 130-1 JOHNSON J12855 Stock #:40170    Description:Johnson J12855, Primary: 190-480V, Secondary: 400v, 12 KVA/3 phase/60 Hz 159-1 YUASA RX-614 Stock #:40217    Description:Yuasa RX 614 Surface Grinder 237-1 HAAS HRT-7 Stock #:40218    Description:Haas 7” Rotary Table with Servo Controller 72" X .025" SLITTING LINE DELTA 72 Stock #:40258       img-2084 HAYSSEN 50D375 Stock #:40266    Description:.6 LB 280 GRAM HAYSSEN MODEL 50D375 DUAL HEAD ACCUMULATOR BLOW MOLDING MACHINE REBUILT 2012 13" x 40" Stand Modern Engine Lathe STANDARD MODERN 1340 Stock #:40288    Description:3 & 4 jaw chucks, TP 40289a ACRA-TURN 1640 Stock #:40289    Description:16" x 40", 3 jaw chuck, QC tool post 40326-2 PRAB "E" SERIES Stock #:40326    Description:Conveyor w/ 12" screw, Turnings SMD18 shredder, Tramp R16 separator, Model 16CD diagonal-shaft chip wringer, manual clean out design wringer settling tank, 6" discharge conveyor screw, E-series chip processing frame, electrical control panel. PRAB Crusher Wringer Stock #:40327    Description:Conveyors, Separator, Vertical Crusher, Wringer 40341-1 ENSHU GE480H Stock #:40341    Description:Fanuc 31iMB control, 50hp, 15k spindle, CAT 40, 2x 19.7" pallets, rotary pallet changer, 60 ATC, full 4th axis, chip conveyor, air curtain, coolant chiller, coolant through spindle, 480v to 200v stepdown transformer 40369 OOYA RE-1225 Stock #:40369    Description:4' arm, 13" column, 36" x 48" T-slotted table, 5 HP, Univ. box table cumberland-grinder-model-16200x CUMBERLAND 1620 Stock #:40376    Description:25 HP CUMBERLAND MODEL 1620X GRANULATOR MFG 2007 20210915-085243 STERLING EXTRUDER Stock #:40400    Description:3.5" STERLING EXTRUDER nrm-70-extruder-a NRM PACEMAKER 70 Stock #:40401    Description:6" NRM MODEL PACEMAKER 70 EXTRUDER 20210521-130040 KOIKE MASTER GRAPH EXTREME Stock #:40435    Description:Koike control, 15'x11' tank, 20' X-axis rail, 3 oxy cutting heads, 1 plasma head with Hyperthem Max-200 power supply 20210521-135142 T&R 2500 KVA Stock #:40436       20210521-135156 ABB 1500 KVA Stock #:40437       40458-2 FURNAS N/A Stock #:40458    Description:Furnas belt/disc sander, no nameplate available but stamped with ID S612888008 40459-1 PRATT & WHITNEY WILSON PROFILER Stock #:40459    Description:WILSON 3-Spindle CNC Profiler, 14’ Between Columns, 40” Between Spindles, (3) Pratt & Whitney 30 HP Milling Heads, 38-3600 RPM, 132” x 360” Table, X-240”, Y-120”, Z-24”, CAT 50 Taper img-6283 VAN DORN 85HT5F Stock #:40483    Description:85 TON 5 OZ VAN DORN MODEL 85HT5F INJECTION MOLDING MACHINE MFG IN 2001 40497-1 NIIGATA HN-80D Stock #:40497    Description:60"X 48"Y 40"Z travels, 31.5" pallet, 50hp, 6k rpm, Fanuc 16i-MB CNC Control, 60-position ATC, Chip Blaster through spindle coolant pump, tool length measurement probe, infrared probe pickup, chip conveyor, 3100 hours cutting time 40498 OKAMOTO ACC-12-24DX Stock #:40498    Description:12" x 24" Fine pole EM chuck, OTW dresser img-7978 MORI SEIKI MS-850G Stock #:40505    Description:Mori Seiki MS-850G Gap Bed Lathe, 17" swing, 25" gap swing, 5hp, 1800 rpm. #6MT taper img-7986 BLANCHARD 18 Stock #:40506    Description:Blanchard Model 18 36" Vertical Rotary Grinder, 42" chuck, vertical spindle, 35hp, 40" swing img-8019 AGIE MONDO 50 STAR Stock #:40508    Description:Agie Futura IV Control, 128 Amp power pack, 29.5" x 21.6" table 19.6"X 13.7"Y 13.7"Z travels img-8080 MITSUI SEIKI VERTEX 550 5X Stock #:40509       123-1 OMi & General Hoist 20 ton + 10 Ton Stock #:40513    Description:60' span, electric hoists on common rail 40515-1 TOSHIBA MOTORS F6004VLF3JOT Stock #:40515    Description:600 HP Toshiba Pump, Nelson Vari-speed Drive & Nuttal Reduction Gear with Toshiba Starter 87-2 Pump Test Equipment Unknown Stock #:40518    Description:6" Diameter Piping Approx. 60 Ft., Flow Meters, Torque Meters, Pressure Transmitters, Speed Sensors, Vibration Sensors, Current Sensors, Automated Suction Valves, Throttling Valves 88-1 ROTO-JET Unknown Stock #:40519    Description:RotoJet Vacuum Pump, 3" & 4" Flowmeters, Flowmeter Remote Transmitters, Torque Meters, Pressure Transmitters, Speed Sensors, Temperature Transmitters, & Vibration Sensor 89-2 ROTO-JET Control Panel Stock #:40520    Description:Rotojet Control Panel with Data Logging Hardware, Operator Panel with Manual Switches & Readouts, Torque Meter Remote Transmitters, Speed Sensor Remote Transmitters img-2751 Power Unit Unknown Stock #:40521    Description:500 HP Power Unit for High Speed Reading 90-1 Control Panel National Instruments Stock #:40522    Description:Control Panel with National Instruments Data Logging Hardware, Cart Area Operator Panel with Manual Switches & Readouts, Torque Meter Remote Transmitters, Speed Sensor Remote Transmitters, Power Meter, Power Monitor 91-1 Centrilift ElectroSpeed Stock #:40523    Description:Centrilift / ElectroSpeed 250 hp Variable Frequency Drive 92-1 TOSHIBA 500 HP Stock #:40524    Description:Toshiba 500 hp Variable Frequency Drive 93-1 EATON Freedom Series 2100 Stock #:40525    Description:(2) Eaton Freedom Series 2100 Motor Control Centers 40545 HITACHI SEIKI HT-40G Stock #:40545       img-3686 DAVIS & STANDARD THERMATIC III Stock #:40551    Description:2.5" DAVIS STANDARD MODEL THERMATIC III EXTRUSION LINE 40561 KALAMAZOO INDUSTRIES S612 Stock #:40561    Description:6" x 48" bel, 20" disc, Baldor motor, Sgl phase

Equipment has been added to your quote cart

Continue browsing

Go to your quote cart

Added

Tell us what you’re looking for

Fill out the form below, and a representative will be in touch with you within one business day.

Loading

Sell Your Machine

Fill out the form below, and a representative will be in touch with you within one business day.

Loading

Machinery and Equipment Appraisal

Contact Jeff Lee for an appraisal consultation.

Allow one of Machinery Network Auctions' experienced AMEA (Association of Machinery & Equipment Appraisers) accredited appraisers to aid your company in assessing the value of your assets. With years of experience and knowledge in the machinery and equipment business, no one knows the ever-changing market like our machinery appraisal professionals.

We can provide complete fair-market value, going-concern or orderly and forced liquidation values for users, banks, and financial institutions.

No one compares to our equipment appraisal services because we’re the experts in helping you save money and investing in your machinery. Call us today for a machinery appraisal and let us help you assess the true value of your assets in today's market.

Jeff Lee: (O) 818-788-2260, (C) 310-600-2834, info@machinerynetwork.com

*All fields must be filled
Loading

Employment Opportunities

Loading

Machinery and Equipment Appraisal

Machinery and Equipment Appraisal

Contact Jeff Lee for an appraisal consultation.

Allow one of Machinery Network Auctions' experienced AMEA (Association of Machinery & Equipment Appraisers) accredited appraisers to aid your company in assessing the value of your assets. With years of experience and knowledge in the machinery and equipment business, no one knows the ever-changing market like our machinery appraisal professionals.

We can provide complete fair-market value, going-concern or orderly and forced liquidation values for users, banks, and financial institutions.

No one compares to our equipment appraisal services because we’re the experts in helping you save money and investing in your machinery. Call us today for a machinery appraisal and let us help you assess the true value of your assets in today's market.

Jeff Lee: Direct: 818-903-2704, Jeff@machinerynetwork.com

Loading

Confidential Valuation on Surplus Assets

Contact Jeff Lee for more details.

Call us today and let us help you assess the true value of your assets in today's market.

Jeff Lee: (O) 818-465-6700, info@machinerynetwork.com 

Loading

Subscribe to our Mailing List

We at Machinery Network, inc realize time is money and strive to ensure you only receive information you request and/or are interested in. If you haven’t already, please take a few seconds to complete the form below so we can streamline the information you receive and make sure it is related to you and your business.

I am interested in information on:

Loading

Covid-19

In these trying times, Machinery Network is doing everything we can to assist America’s manufacturers weather the storm. We are currently offering drastic discounts and extremely creative finance solutions to anyone who may need them. Call us today and see how we can help…Thanks & be safe

Announcement