- RELATED MACHINES
ONE (1) USED
4000 WATT AMADA GEMINI FO4020NT FLYING OPTIC, HIGH SPEED, DUAL PALLET
LASER SYSTEM MANUFACTURED:2007 - INSTALLED NEW:2008
APPROX: 19,500 TOTAL HOURS - TURBO BLOWER WAS REPLACED AT 12,000 HOURS
FO 4020NT Standard Features
The FO 4020NT is designed and engineered to reliably and economically cut all types of material in a full range of thicknesses.
Maximize utilization with minimal setup between jobs High speed processing of thin and thick materials Operator-friendly Windows based network compatible control X-Axis "dual drive" rack & pinion gantry for precise location at the fastest speed High-speed pallet shuttle Cast iron frame for superior stability Water Assisted Cutting System (WACST) uses an adjustable water mist to absorb heat generated by the cutting process
6' x 13' maximum sheet size
3150 IPM maximum X- and Y-axis speed (4454 IPM max. at 45 vector)
2362 IPM maximum Z-axis speed
Fanuc 160iL 32-bit control
Travel Method Stationary table, X, Y and Z-axis movement for cutting head
Control Method X, Y and Z simultaneous 3 axis control
Drive Motors Fanuc AC servo motors
Maximum Sheet Size 80" (Y) x 160" (X)
Maximum Axis Travel 80.7" (Y) x 174" (X) x 7.8" (Z)
Maximum Axis Positioning Speed 3,150 inches per minute (80m/min) per axis
(4,554 inches per minute 45 vector)
Maximum Speed Z-Axis 2,362 inches per minute
Positioning Accuracy 0.0004"/20"
Maximum Material Weight 3,454 lbs.
Assist Gas Automatic 4 ports with NC pressure Control
Machine Footprint 483" x 124"
Machine Weight 12 Metric Tons
Electrical Requirements 208V, 3 Phase, 60Hz
Laser Power 4000 or 6000 watts
Display LCD Color Graphics Display
Control Function X, Y, Z-Axis Simultaneous and Focus Lens B-axis, Adaptive
Optic and Laser Power control (CW, Gated Pulse, Pierce Routines etc.).
Data Input Method Touch screen, Keyboard, Ethernet, Wireless, CD, USB, 3"
Minimum Command Unit 0.0001" (X, Y, Z)
Minimum Travel Unit 0.0001" (X, Y, Z)
Standard Memory 2 MB
Hard Drive 10 GB
Operating Modes Automatic and Manual
Display Modes Program Contents, Position Information, Program Check, Settings,
Parameters, Beam Diameter Compensation, Assist Gas Status, Self Diagnostics
Interlock Displays Cooling Water Status, Gas Pressure Status, Vacuum Status,
Turbo Blower Malfunction, Shutter Status, Beam Power, Resonator Discharge,
Door Open, WACS.
Electrical requirements See Motion Package
At your request, we previously quoted you a similar machine. The above machine has recently become available and we thought you would appreciate receiving this quote. If you are no longer in the market for this type of machine, please contact us via email, phone, or fax and we will immediately remove you from our list.
All equipment offered subject to prior sale. Specifications are believed to be correct but inspection of equipment is responsibility of buyer. This quotation is a proposal for sale and not a binding contract. Please request an invoice with our terms and conditions at the time of sale.